Iron Bacteria in De Soto Parish: Understanding Lab Reports and Local Water Data

$1,706.40 $2,195.00
Rust Iron Stains & Sulfur Filter
✓ Free shipping in the USA · ✓ 90-day returns · ✓ Secure checkout
What a Certified Laboratory Test for Iron Reports and How to Read It
A laboratory test report for iron bacteria or iron concentration lists the measured iron levels in micrograms per liter (ug/L). It typically includes the concentration found in a water sample from a specific well or tap. This number helps identify iron presence but does not by itself confirm bacteria presence, which requires separate analysis. Reading the report, you will see a numeric result alongside detection limits. A detection means the instrument measured iron, not that a violation or health concern is present.
The Role of Plumbing Material and Age, Separate From Source Water
Water quality inside your house can be affected by older plumbing materials or corrosion that release iron or iron bacteria buildup. This household-level influence is distinct from the water's source. Even if the aquifer water is low in iron, iron bacteria may develop in pipes or fixtures if iron is present and conditions support bacterial growth. Understanding plumbing condition is important to differentiate between iron issues from source water versus in-home factors.
How Sample Depth, Well Depth or Source Type Changes What You Should Expect
The U.S. Geological Survey samples wells in De Soto Parish's aquifer 124WLCX at depths ranging from 126 to 292 feet. This depth influences the iron levels recorded. Deeper wells often have different water chemistry compared to shallow ones. Your own well depth and type can result in water iron levels differing from the area median. Knowing your well depth and source helps set expectations but does not replace individual testing.
What 'Detected', 'Median' and 'Range' Mean in the Sampling Record on This Page
Samples in the De Soto Parish aquifer 124WLCX showed iron detected in all 14 measured results from 7 wells, with a median of 17.25 ug/L and range from 4.9 to 6970.0 ug/L. 'Detected' means iron was measured above the instrument reporting limit in every sample. The median is the middle value, illustrating typical iron levels. The range shows variability between wells and times sampled over 2013 to 2015. These figures represent area conditions, not specific individual well water.
What the Measured Range Means Against the Relevant Federal Standard, and What It Does Not Mean
None of the iron results for De Soto Parish aquifer 124WLCX exceeded any federal health-based standard. Iron measurements here do not indicate water safety concerns but relate to aesthetic qualities like taste or staining potential. This record does not reveal your own well’s iron level or bacteria presence; only a certified lab test of your water can do that. Iron bacteria can cause slime and staining issues that a Pentair Iron Bacteria & Slime Filter addresses by reducing bacteria and iron buildup effectively. This system ships ready to configure for residential use.
This information pertains to iron sampling in De Soto Parish aquifer 124WLCX only, based on U.S. Geological Survey groundwater data collected between 2013 and 2015. Further details and updates can be found at the U.S. Geological Survey website monitoring location 320251093514501.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2015-06-10. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Iron in the 124WLCX aquifer (De Soto Parish): 14 results from 7 wells, median 17.25 ug/L, range 4.9-6970.0 ug/L; none above any federal threshold
