What the Range of Iron Measurements Means and What It Does Not
When looking at laboratory reports from groundwater wells in Coconino County aquifer 310COCN, iron was detected consistently. Sampling from 19 results across three wells found iron concentrations ranging from 1.0 to 4543.0 micrograms per liter (ug/L), with a median of 1800.0 ug/L. These wells are between 600 and 1150 feet deep. It is important to note that none of these iron levels exceeded any federal health-based standard. This data reflects the regional aquifer characteristics and does not determine the iron concentration in your private household well or water system.
Detection of iron does not mean the water is unsafe; it is a common element in groundwater in this area. Iron presence can cause aesthetic issues such as staining or discoloration and may indicate iron bacteria presence, but it is not a federal violation or health risk. To know your home's water iron content, testing your own supply is necessary since regional data cannot replace individual analysis.
How Water Quality Changes at the Tap After Using the Autotrol Iron Bacteria & Slime Filter
Households experiencing effects of iron bacteria—such as slime formation, staining, or slow clogging of existing equipment—can benefit from specialized filtration. The Autotrol Iron Bacteria & Slime Filter is designed to handle iron bacteria effectively by targeting both dissolved iron and bacterial slime that typical equipment may not fully address. Once in place, water clarity improves, staining potential reduces, and slime buildup is controlled, improving household water quality even when previous equipment struggles to keep pace.
Interpreting the Median and Range of Iron Data as a Homeowner
The median iron concentration of 1800.0 ug/L seen in the regional samples suggests that typical groundwater in this aquifer often contains detectable iron. The wide range—from 1.0 to 4543.0 ug/L—indicates variability among wells due to local geology or depth differences. For a homeowner, this means that your well water could vary significantly from this range. Without your own water test, relying on area data can help you anticipate the potential for iron-related challenges but does not specify your exact water conditions.
Evaluating Treatment Needs Relative to Household Water Usage
When considering filtration solutions like the Autotrol System, household water demand plays a key role. The system is capable of managing typical residential flow rates and volumes and is suited for ongoing use in households where existing systems cannot keep up with iron bacteria effects. Accurately estimating daily water use, including peak flow periods, helps ensure that the filtration technology can consistently deliver improved water quality without overloading the filter’s capacity.
Maintenance Overview for the Autotrol Iron Bacteria & Slime Filter
The Autotrol System ships ready to configure and requires periodic maintenance to maintain performance. The filter must be cleaned and regenerated following manufacturer guidelines, which users can manage with basic routine care. Regular maintenance prevents buildup that could reduce the filter's effectiveness over time, ensuring continued control over iron bacteria and slime challenges.
Distinguishing Iron Bacteria from Other Water Constituents
Iron bacteria is often confused with sediment or dissolved iron alone. Unlike clear dissolved iron—which may cause discoloration or metallic taste—iron bacteria produces slime and can form coatings and deposits in pipes and equipment. It also differs from manganese and other mineral-related water problems. Understanding this distinction helps target treatment with appropriate filters like the Autotrol Iron Bacteria & Slime Filter, which specifically addresses biological iron fouling, not just mineral removal.
These observations are based on 19 groundwater samples from three wells in Coconino County, aquifer 310COCN, sampled between 2017 and 2026 by the U.S. Geological Survey. For more detailed public data, the USGS water information portal is the source.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2026-04-30. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Iron in the 310COCN aquifer (Coconino County): 19 results from 3 wells, median 1800.0 ug/L, range 1.0-4543.0 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.