Heavy Metals in Sussex County Drinking Water: Understanding Barium Levels in Aquifer 112CLMB

$2,837.99 $3,958.00
Heavy Metals Whole-House Filter
✓ Free shipping in the USA · ✓ 90-day returns · ✓ Secure checkout
What do 'detected', 'median', and 'range' mean in the barium sampling results for Sussex County aquifer 112CLMB?
The U.S. Geological Survey sampled groundwater from ten wells ranging 18 to 139 feet deep in Sussex County's aquifer 112CLMB between 2011 and 2024. In all 26 samples, barium was detected. The median value of 91.75 micrograms per liter (ug/L) represents the middle point of these results, meaning half the measurements were above and half below this concentration. The range from 2.99 to 357.0 ug/L shows the variability detected across different wells and times. Detection means the measuring instruments found some barium present but does not indicate a problem by itself. These results reflect conditions in this aquifer area, not any specific homeowner’s water.
How do public water system records differ from private well testing for barium levels?
Public water systems regularly monitor and report water quality, summarizing data over wider areas or multiple wells, which provides a general picture. Private well testing, in contrast, measures an individual well’s water at a point in time and is the only way to determine a household’s specific barium concentration. Public records cannot establish whether a given private well exceeds any limits or what its exact composition is. Thus, homeowners must obtain their own certified water tests for precise information.
What does a certified laboratory test for barium report, and how should it be read?
A certified laboratory will measure the barium concentration in micrograms per liter (ug/L) or parts per billion (ppb) in your water sample. The result will specify the exact value detected and whether any federal or state guidelines are exceeded. Since barium concentrations in Sussex County aquifer 112CLMB wells have not been found above federal thresholds, a well test result below or near these levels does not indicate a health-based concern. Any treatment decisions should be based on your own test results, not solely on area-wide data.
What should I write down before seeking advice about water treatment for heavy metals?
Gathering accurate information helps in choosing the right treatment. Before consulting on treatment options, note the results from your certified laboratory test for barium and any other detected heavy metals. Include the exact concentrations, sample date, and testing lab credentials. Also, document your well depth, water usage patterns, and any household water quality issues you observe. This data ensures treatment recommendations match your individual water conditions.
What does the range of barium concentrations in Sussex County aquifer 112CLMB mean compared to federal standards, and what does it not mean?
Federal standards set a maximum contaminant level (MCL) for barium in drinking water to protect health. The recorded barium samples from this aquifer area ranged from 2.99 to 357.0 ug/L, with none exceeding the federal MCL. This means that while barium presence is consistently measurable, the concentrations found in these sampled wells have stayed within regulatory limits. However, these area-wide findings do not guarantee that any private well’s water is below the limit. Individual testing is necessary. Detection above zero is common and should not be confused with a water safety violation.
Closing
These data describe barium levels detected in samples from ten wells in Sussex County's aquifer 112CLMB, collected over thirteen years by the U.S. Geological Survey. They provide context about heavy metal presence in the local groundwater but do not substitute for specific well testing. For more detailed information, the government source for these measurements is available through the USGS groundwater data portal.
For households evaluating treatment options for heavy metals, the Fleck Heavy Metals Filter system ships ready to configure and can be a suitable choice once you know your individual water quality from lab testing.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2024-08-28. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Barium in the 112CLMB aquifer (Sussex County): 26 results from 10 wells, median 91.75 ug/L, range 2.99-357.0 ug/L; none above any federal threshold
