Pentair Heavy Metals Filter

Buy Now

View full details

When you turn on your tap in Salt Lake County, you might notice nothing unusual. However, the water comes from a complex aquifer known as 100VLFL where federal data shows nickel is regularly detected. Understanding what this means can guide you through choosing the right heavy metals treatment for your home.

1. Check Your Water in Order: From Simple to Specific

Observe Any Visual or Taste Clues

Before testing, note if your water shows unusual color or metallic taste, though these are rare with nickel at observed levels.

Review Any Recent Municipal or Well Water Reports

Look up local water quality reports for your area to see if nickel has been recently mentioned.

Consider Laboratory Testing for Your Household Supply

Because government data covers samples from wells 23 to 1385 feet deep across multiple locations, your own water quality can only be confirmed by a laboratory test specific to your source.

2. Interpret What the Nickel Range Means

Nickel Detected in 73 of 82 Samples but Below Federal Thresholds

The U.S. Geological Survey sampled 48 wells in Salt Lake County’s 100VLFL aquifer between 2010 and 2021. Nickel was found with a median concentration of 0.86 micrograms per liter (µg/L), ranging from 0.09 to 4.6 µg/L. None exceeded federal health-based limits.

Detection Does Not Indicate a Violation or Unsafe Water

Detection simply means nickel was measured; it does not mean your water fails any safety standards or causes harm.

Aesthetic Considerations Are Separate from Health Standards

Nickel levels measured are well below those linked to taste or staining issues, which are governed by other guidelines.

3. Account for Plumbing Materials and Age

Older Pipes Can Affect Metal Presence Independently

Even if source water nickel is low, household plumbing materials can introduce or retain metals. Copper, brass, and solder containing nickel impact local concentrations.

Corrosion and Pipe Type Influence Metal Levels at Fixtures

Corrosion can increase metal presence temporarily, differentiating plumbing effects from aquifer data.

4. Document Before Seeking Treatment

Record Your Water Source and Well Depth

Knowing if your water is from the 100VLFL aquifer and your well’s depth can help clarify expected nickel range.

Keep Test Results and Notes on Taste or Appearance

Track any home tests or laboratory reports along with observations to guide your treatment decision.

5. Differentiate Heavy Metals from Other Water Concerns

Heavy Metals vs. Hardness or Iron

Nickel is distinct from hardness minerals and iron, which cause different issues like scaling or rust stains.

Nickel Presence Does Not Indicate Microbial or Chemical Contamination

Heavy metals are separate from contaminants like bacteria or chlorination byproducts.

6. Seasonal and Multi-Year Variation in Nickel Levels

Sampling Spanning 2010 to 2021 Shows Consistent Detection

The dataset includes 82 samples collected over more than a decade, with no major fluctuations above federal thresholds, indicating relatively stable nickel presence.

Depth and Location Affect Variation

Nickel levels vary within the range partly due to well depths from 23 to 1385 feet and site-specific conditions.

After understanding your household’s specific nickel presence through testing and documentation, the Pentair Heavy Metals Filter ships ready to configure and offers a targeted solution designed to reduce heavy metals based on your measured demands.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2021-12-08. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Nickel in the 100VLFL aquifer (Salt Lake County): 82 results from 48 wells, median 0.86 ug/L, range 0.09-4.6 ug/L; none above any federal threshold