Documented Selenium Levels in Muscatine County Aquifer 111ALVM
Government sampling by the U.S. Geological Survey has measured selenium concentrations in groundwater from aquifer 111ALVM in Muscatine County. Results from four wells sampled between 2011 and 2017 show selenium was detected in most samples with a median value of 0.695 micrograms per liter and a range from 0.09 to 1.3 micrograms per liter. These samples, taken from wells 14 to 193 feet deep, all remain below federal thresholds for selenium. This information reflects the condition of the aquifer area wells sampled, not any individual household well.
What Details to Record Before Selecting Heavy Metals Treatment
Before choosing equipment for heavy metals reduction, homeowners should have their own water tested for selenium and other metals. Note the test date, sample source depth, and laboratory methods used. This data helps verify if area records reflect your water and guides system sizing and technology choice.
Sampling Scope and Its Limits for Household Decisions
The data set includes only five samples from four wells over six years. While useful for understanding regional baseline levels, such a small sample size cannot account for local variations. Depth differences of wells sampled also suggest fluctuations based on source depth. Individual household water quality may differ, requiring specific testing for accurate assessment.
Matching Treatment Equipment to Household Water Use
When choosing heavy metals filtration systems, estimate your household’s daily water consumption and peak flow rates. Equipment capacity should comfortably meet these demands to maintain performance and ensure water quality. Systems like the Fleck Heavy Metals Filter ship ready to configure, allowing setup according to specific household needs.
Plumbing Materials and Age Affect Water Quality Independently
Metal levels in tap water can be influenced by plumbing pipes and fixtures, which may add metals unrelated to the aquifer source. Older plumbing may leach metals despite source water compliance. Testing both source water and tap water aids in distinguishing treatment focus.
Comparing Muscatine County Selenium Data with Neighboring Areas
When comparing selenium levels in aquifer 111ALVM to adjacent counties, consider sampling years, well depths, and testing methods. Regional geology influences baseline metal concentrations. A nearby county’s data may differ without indicating a higher or lower risk for your property.
Effects of Untreated Selenium Over Time in Residential Water
Selenium at levels found in this area does not exceed federal limits and thus is not a safety concern under current regulations. However, long-term exposure to elevated selenium beyond limits can affect taste, cause slight staining, or contribute to unusual water chemistry. Treatment is an option if personal testing shows higher levels or aesthetic issues.
What Not to Conclude from Area Selenium Data
Area monitoring data provides an informative overview but does not establish the condition of your own well water. Detection does not mean unsafe or legally violated levels. Only a specific test of your water confirms its condition. Area figures should be used as a guide alongside individual water analysis when considering treatment options.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2017-06-19. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Selenium in the 111ALVM aquifer (Muscatine County): 5 results from 4 wells, median 0.695 ug/L, range 0.09-1.3 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.