Pentair Heavy Metals Filter

Buy Now

View full details

Are heavy metals present in your water? This question is common for residents of Arapahoe County who want to understand what government sampling says about their regional groundwater and how to approach treatment choices for their household.

If You Rely on Public System Records versus Testing Your Own Well

Government sampling in Arapahoe County’s 111ALFP aquifer provides data from wells ranging 20 to 25 feet deep, but these results represent regional conditions, not your specific water source. Public system records reflect broad area sampling and cannot substitute for a water test of your household well or tap water, which is necessary to determine your individual water quality.

If You Need to Tell Heavy Metals Apart from Other Water Issues

Heavy metals, like nickel detected in this area, differ from common water issues such as hardness or microbial contamination. Nickel presence does not cause cloudiness or typical hardness effects, so you should distinguish these effects by symptom and testing. Heavy metals require different treatment approaches than minerals or bacteria.

If Sample Depth and Well Characteristics Affect What You Should Expect

The groundwater sampling took place at relatively shallow depths (20–25 feet) in the Arapahoe County aquifer; deeper wells or different source types might show different metal concentrations. Surface influences and plumbing materials can also change what appears in your home's water at point of use, so depth and source are key factors to consider.

If You Wonder What Terms Like 'Detected,' 'Median,' and 'Range' Mean in This Sampling

• Detected: Nickel was found in 180 out of 183 samples but detection simply means the instrument measured some amount, not that it exceeds any health or safety standard.
• Median: The typical nickel level across these samples was 4.85 micrograms per liter, showing what is common but not what your household has.
• Range: Values varied from 2.2 up to 17.0 micrograms per liter, which is well below any federal standard for nickel in drinking water in this data set.

If Your Household Experiences Specific Symptoms Possibly Related to Heavy Metals

Heavy metals may cause water discoloration, metallic taste, or staining on fixtures if concentrations are high enough, but these symptoms can also arise from other water chemistry issues. Absence of these signs does not guarantee the absence of metals, so testing is important for confirmation.

If You Need to Decide What to Check First When Testing Your Water

• Start with basic water quality tests from a certified laboratory, including metals analysis specific for nickel and other heavy metals.
• Check for plumbing corrosion or material influences that might contribute metals independently from the water source.
• Only after confirming elevated metals should you evaluate treatment options.

For households confirming elevated heavy metals aligned with this regional profile, the Pentair Heavy Metals Filter offers a documented method to reduce nickel and similar contaminants. This system ships ready to configure for residential water treatment needs, providing a reliable step for improving water quality based on measured demand.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2025-12-12. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Nickel in the 111ALFP aquifer (Arapahoe County): 183 results from 3 wells, median 4.85 ug/L, range 2.2-17.0 ug/L; none above any federal threshold