Recognizing Household Signs of Heavy Metals Presence
Discolored or dull appearance of fixtures is uncommon with selenium
Selenium does not typically cause visible staining or discoloration, so household surface changes are less likely indicators.
Lack of foul taste or odor related to selenium in water
Unlike some heavy metals, selenium in usual concentrations does not impart off tastes or smells.
Possible subtle effects on water clarity or mild film noticed
Though rare, selenium presence might correlate with other dissolved solids affecting water aesthetics, but this is not conclusive.
No immediate health symptoms directly linked to typical selenium levels
Short-term exposure to the range found in local aquifers generally does not produce acute symptoms.
Considering Plumbing Material and Age Apart from Source Water
Older plumbing may contribute metals unrelated to source water selenium levels
Metal pipes or fixtures can leach materials; these sources are separate from aquifer selenium.
Plastic or newer materials reduce risk of plumbing-origin metals
Modern plumbing components tend not to add heavy metals, isolating source water as a primary concern.
Corrosion or pipe scale buildup affects metal release more than selenium from water
Household metal contamination often relates to plumbing condition rather than selenium in the supply itself.
Testing source water and home plumbing separately is important
To understand selenium origin, differentiate what comes from the aquifer versus household infrastructure.
How Fleck Heavy Metals Filter Addresses Selenium in Water
Specialized filtration media target dissolved heavy metals including selenium
The Fleck System uses technology designed to reduce dissolved selenium and similar metals from water.
Operates without complex maintenance or chemical additives
This filter works mechanically, requiring no added treatments, simplifying household use.
Ships ready to configure for home water systems
The filter arrives prepared for straightforward connection to residential setups without external service needed.
Effective across the range of selenium concentrations documented locally
Designed to handle selenium levels as found in the Arapahoe County aquifer samples, providing consistent treatment.
Steps to Narrow Down Selenium Concerns Cost-Effectively
Check for plumbing signs of corrosion or metal taste independent of source
Identify if household pipes could contribute metals separate from water source.
Obtain a certified laboratory water test specifically for selenium
This test establishes your household’s actual selenium concentration, essential for treatment decisions.
Compare test results with local aquifer median and range
Understand how your water relates to area sampling data from USGS wells 20–25 feet deep.
Evaluate filter needs based on tested concentration and household water use
Select treatment appropriate to your specific conditions rather than assumptions from regional data alone.
What to Expect in Tap Water After Fleck Heavy Metals Filter Use
Reduction of visible and dissolved heavy metals improving water clarity
Water treated by the Fleck System typically shows clearer appearance without metallic film or haze.
Neutral taste without metallic or unusual flavors
Removing selenium and other metals helps restore neutral water taste.
Safe, consistent water quality matching residential health guidelines
Treated water aligns with federal drinking water criteria, reflecting no exceedance of selenium thresholds.
Peace of mind knowing your water is filtered for local heavy metals risks
The Fleck Heavy Metals Filter offers a targeted solution validated for conditions documented in your area.
Final Step: Order a selenium-specific lab test of your household water. A result below federal maximum allowable levels confirms no action is needed. If above median local levels, consider the Fleck Heavy Metals Filter as an effective response.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2025-12-12. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Selenium in the 111ALFP aquifer (Arapahoe County): 183 results from 3 wells, median 3.8 ug/L, range 0.15-19.4 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.