Hard Water Challenges in Hillsborough County: Effective Commercial Building Treatment Solutions

WSP Twin-Tank Water Softener - Fiberglass Tanks

$7,298.68

36 Fiberglass Tanks - Twin Unit Skid

View full details

✓ Free shipping in the USA  ·  ✓ 90-day returns  ·  ✓ Secure checkout

36 Fiberglass Tanks - Twin Unit Skid

36 Fiberglass Tanks - Twin Unit Skid

Buy Now

View full details

Understanding Hillsborough County Groundwater and Your Building's Water Supply

Water in Hillsborough County primarily originates from the Floridan aquifer system, specifically aquifer 120FLRD in this area. Groundwater drawn from this source is distributed through wells that can range in depth from around 29 to nearly 300 feet. This water travels from the aquifer to your building’s plumbing network, supplying all outlets from a common source.

Stepwise Approach to Evaluating Hard Water for Commercial Use

Start with Visual and Equipment Checks

  • Observe scale buildup on faucets and in pipes within the building as a first indicator of hardness.
  • Check the performance of commercial appliances that rely on water, like boilers and dishwashers, for any inefficiencies caused by mineral accumulation.

Consider Basic Water Testing

  • Use standard hardness test kits to get a preliminary idea of water hardness levels.
  • Identify if hardness falls within the typical range for Hillsborough County, recognizing that only laboratory tests confirm precise levels.

Confirm with Laboratory Analysis

  • Submit water samples from your specific well or building source to a certified lab for exact measurement of calcium and magnesium concentrations.
  • Understand that lab results are essential to decide on the proper scale and treatment equipment size.

Influence of Well and Source Characteristics on Water Hardness

Sample Depth and Well Construction

  • Deeper wells drawing from the Floridan aquifer can have variable mineral content, contributing to a wide hardness range.
  • Variations in geological strata influence the levels of calcium and magnesium dissolved in groundwater.

Source Type Distinction

  • Public water supplies may blend water from multiple wells, potentially altering hardness concentration compared to individual private wells.

Interpreting Regional Sampling Data for Commercial Water Management

Meaning of Detected, Median, and Range in Regional Data

  • Detected: All 30 sampling results found hardness present; none were below reporting limits.
  • Median (250 mg/L): This value represents the middle level of hardness detected across all samples, reflecting a typical condition within the aquifer.
  • Range (64.9 to 549 mg/L): Indicates variability in water hardness depending on well location and depth, with some samples showing lower hardness and others significantly higher.

Application for Whole-Building Treatment

  • Because hardness varies widely, commercial operators should design treatment systems capable of addressing the upper range levels rather than relying solely on median values.
  • Systems configured to handle large volumes and higher hardness ensure consistent water quality across all building outlets.

Special Considerations for Commercial Properties

System Scale and Capacity

  • Commercial buildings require equipment sized for continuous high-volume water flow.
  • Treatment solutions must accommodate all points of use simultaneously without loss of performance.

Seasonal and Variable Use Patterns

  • Adjustments may be needed if water demand fluctuates seasonally or during off-peak periods to maintain treatment effectiveness.

Causes of Hardness in Hillsborough County Water

  • Hardness results from naturally occurring calcium and magnesium dissolved from limestone and dolomite minerals in the Floridan aquifer.
  • These minerals enter groundwater over extended contact periods as water moves through the aquifer layers.

What Hillsborough County Median and Range Data Indicate About Water Quality Standards

  • All sampled hardness levels in this dataset are below any federal health-based thresholds, indicating no regulatory violation.
  • Hardness is primarily an aesthetic and operational concern, affecting water taste, scaling, and appliance longevity, not safety.

Key Points to Avoid Drawing from Area Data Alone

  • Area sampling results do not represent individual well or building water; only direct testing can reveal specific hardness levels on your site.
  • Detection of hardness is expected in this region and does not imply unsafe water conditions.
  • Decisions on treatment system size and configuration should rely on your building’s water analysis rather than solely area medians or ranges.

A Reliable Commercial Solution: 36 Fiberglass Tanks - Twin Unit Skid

For comprehensive treatment of hard water affecting an entire commercial building, the 36 Fiberglass Tanks - Twin Unit Skid provides a robust system skid designed to handle large flow volumes and variable hardness levels typical in Hillsborough County’s aquifer 120FLRD. This equipment ships ready to configure for integration into your water system, supporting efficient calcium and magnesium control to protect plumbing and equipment throughout your facility.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2012-11-07. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 120FLRD aquifer (Hillsborough County): 30 results from 20 wells, median 250.0 mg/L, range 64.9-549.0 mg/L; none above any federal threshold