Step 1: Interpreting 'Detected', 'Median', and 'Range' in Fluoride Sampling Data
The US Geological Survey collected six fluoride measurements from two wells in Cumberland County’s 112OTSH aquifer between 2014 and 2017. The wells were 22 to 38 feet deep. Fluoride was detected in four samples, with two below the reporting limit—meaning fluoride levels were too low to quantify accurately in those cases. The median value is 0.035 mg/L, and results ranged from 0.02 to 0.05 mg/L. These figures reflect groundwater in the aquifer area, not your household well specifically. No reading exceeded federal fluoride thresholds.
Step 2: Ruling Out Other Factors Before Laboratory Testing
If fluoride is a concern for your household, begin by reviewing any existing municipal water quality reports or private well records if available. Check plumbing materials and water softening or filtering equipment that may influence water characteristics. Next, consider testing only if you notice specific fluoride-related issues or want precise knowledge of your water chemistry.
Step 3: Understanding a Certified Laboratory Fluoride Test Report
A certified laboratory test on your own water sample will provide a precise fluoride concentration, reported in milligrams per liter (mg/L). This test is the only way to establish fluoride levels at your tap. The lab report might also include detection limits—the smallest concentration measurable reliably. Fluoride results below reporting limits indicate fluoride is present at very low concentrations.
Step 4: How Well Depth, Sample Depth, and Water Source Type Affect Expectations
Data for aquifer 112OTSH come from relatively shallow wells between 22 and 38 feet deep. Deeper wells or surface water sources might show different fluoride patterns. Fluoride can vary by geology, depth, and hydrology. Your own well may differ, especially if it taps a different part of the aquifer or a different water source.
Step 5: Comparing Cumberland County Fluoride Data with Neighboring Areas
Fluoride concentrations can vary significantly across counties, even within the same state. Comparing neighboring counties’ data can provide context but shouldn’t be used to infer your well’s fluoride levels. Government sampling serves as a regional snapshot, not a household profile.
Step 6: Adapting Fluoride Treatment for Large Households, Vacation Homes, or Seasonal Use
The size and usage pattern of your household impact fluoride treatment needs. Large households may require equipment with greater capacity or flow rate compatibility, while seasonal homes may benefit from systems designed for intermittent use. Accurate knowledge of your water’s fluoride concentration, flow demands, and daily consumption will guide effective treatment choices.
Managing Fluoride with the Fleck Fluoride Filter
Once you determine your fluoride levels through testing and understand your household’s demand, the Fleck Fluoride Filter offers a technology solution designed to reduce fluoride in drinking water. This system ships ready to configure and is suited for residential use, adapting to your measured water usage and fluoride concentration.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2017-10-05. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Fluoride in the 112OTSH aquifer (Cumberland County): 6 results from 2 wells, median 0.035 mg/L, range 0.02-0.05 mg/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.