Pentair Fluoride Filter

Buy Now

View full details

The 112OTSH aquifer in Barnstable County, Massachusetts, feeds many household wells and public water sources. Water drawn from this aquifer travels through pipes and your home’s plumbing before reaching your tap. This briefing outlines what local fluoride measurements reveal and what to consider when assessing your water.

1. Plumbing Material and Age Impact Separate from Source Water

Fluoride concentrations recorded in water samples come from the aquifer itself, not from household plumbing. However, plumbing materials and their age can affect water quality through other means, such as leaching metals or causing discoloration unrelated to fluoride presence. For fluoride, the measured values reflect the groundwater chemistry before it passes through pipes.

2. How the Pentair Fluoride Filter Addresses Fluoride in Water

When fluoride is present at levels you wish to reduce, a Pentair Fluoride Filter can be part of your water solution. This system uses specialized media designed to reduce fluoride concentrations effectively. It ships ready to configure for connection at the water point where reduction is needed, making it a practical choice for managing fluoride content.

3. Effects of Sample Depth, Well Depth, and Source Type on Fluoride Expectations

The US Geological Survey sampled 53 wells in this aquifer area, ranging from 3 to 57 feet deep. Fluoride was detected in 50 samples with concentrations from 0.01 to 0.35 mg/L, and a median value of 0.05 mg/L. These figures represent a broad view of the aquifer water quality across different depths and well types. Deeper or shallower wells can show some variation, but none of these samples exceeded federal fluoride thresholds.

4. Differences Between Public-System Records and Private-Well Testing

Public water systems regularly test fluoride and report results for compliance and public information, typically with larger data sets. Private wells, however, vary widely and require individual testing to determine fluoride levels. The USGS sampling provides an area baseline but does not replace testing your specific well if you want to know your household water’s exact fluoride concentration.

5. How Fluoride Enters Groundwater and Distribution Systems in Barnstable County

Fluoride in groundwater typically originates from natural sources such as rock minerals dissolving into water over time. In Barnstable County’s 112OTSH aquifer, this natural fluoride presence is generally low to moderate, as shown by federal sampling. The water distribution system, where present, does not add fluoride beyond what exists naturally unless water treatment additives are used, which is not indicated in this aquifer’s records.

6. Changes in Treated Water at the Tap When Using the Pentair Fluoride Filter

After configuring the Pentair Fluoride Filter in your water system, you can expect a noticeable reduction in fluoride concentration, depending on your original water chemistry. This filter works by adsorbing fluoride ions from the water passing through it, lowering the fluoride content before it reaches your tap. This change helps address fluoride concerns stemming from natural groundwater levels without introducing other chemical additives.

In summary, the USGS sampled 32 wells in Barnstable County’s 112OTSH aquifer between 2016 and 2023, detecting fluoride in most samples but always below federal limits. For precise knowledge of your household water, testing your specific supply is recommended. The full data set is available from the US Geological Survey at waterdata.usgs.gov.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2023-08-24. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Fluoride in the 112OTSH aquifer (Barnstable County): 53 results from 32 wells, median 0.05 mg/L, range 0.01-0.35 mg/L; none above any federal threshold