Salt Less Water Softener

Salt Less Water Softener

Buy Now

View full details

In Glynn County, Georgia, household water comes primarily from the 120FLRD aquifer, a deep groundwater source sampled by the U.S. Geological Survey. This aquifer, with wells measured between 874 and 1076 feet deep, exhibits notable levels of dissolved minerals such as calcium and magnesium, recorded at a median concentration of 440 mg/L, with samples ranging from 233 mg/L up to 872 mg/L. Although these numbers indicate mineral presence, none of the sampled results exceed federal health-based thresholds.

What changes for a large household, a second home, or a seasonal property?

Larger households or properties used seasonally may find the impact of mineral content on skin moisture more pronounced simply due to increased water usage or intermittency in water flow. With more frequent exposure, or irregular water use patterns, issues such as dry skin can become more noticeable. In these cases, it is important to consider equipment capacity that aligns with periodic or elevated water demand to maintain comfort and skin hydration.

Which fixtures, appliances or processes are affected first and why?

The water coming from the 120FLRD aquifer often interacts directly with bathroom fixtures like showers and faucets where skin contact occurs most. Since calcium and magnesium contribute to what some refer to as water 'hardness,' these minerals can affect how water feels on the skin, potentially leading to dryness due to reduced natural moisture retention. Therefore, bathroom showerheads and sinks are typically the first points where dry skin symptoms may be noticed.

How to compare this area's record with a neighboring county's without overreading it?

When comparing Glynn County's water mineral data to neighboring counties, it is important to note that aquifer composition varies geographically but does not necessarily imply poorer water quality. Differences in median and range values reflect local geology rather than health risk or water safety. Neither higher nor lower mineral detection alone should dictate a choice of treatment without understanding specific household water tests.

A worked example: reading the record's median and range as a homeowner would

Consider the median value of 440 mg/L for calcium and magnesium in the Glynn County aquifer. This signals a moderate to high level of dissolved minerals that can influence how water feels on skin but does not indicate a violation of any federal threshold. The range from 233 mg/L to 872 mg/L shows variability that homeowners should be aware of; only a test of their specific water source will determine their exact exposure.

How public-system records differ from private-well testing in what they establish

Public water system reports often provide a broad overview of regional water quality and tend to focus on parameters monitored for regulatory compliance. In contrast, private-well testing offers precise data on the water actually entering a home, including mineral concentrations affecting skin moisture. Homeowners relying on private wells are encouraged to seek certified laboratory testing to identify their specific water characteristics accurately.

What a certified laboratory test for this constituent reports and how to read it

A certified laboratory analysis for calcium and magnesium will indicate concentration levels, usually reported in mg/L or parts per million. These values inform whether water may feel 'hard' or contribute to dry skin but do not alone determine safety or health risks. Understanding these results enables selecting appropriate water treatment technology to address dryness effectively.

Choosing the right water treatment begins with recognizing the mineral content characteristic of Glynn County's 120FLRD aquifer and how it affects your household's water use patterns and skin comfort. The Pentair Dry, Itchy Skin System ships ready to configure and is designed to help mitigate mineral-related dryness attributable to local water conditions. Careful consideration of household size, water usage, and specific water testing can guide you toward the best solution for managing dry skin concerns related to your water supply.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2016-12-06. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 120FLRD aquifer (Glynn County): 16 results from 5 wells, median 440.0 mg/L, range 233.0-872.0 mg/L; none above any federal threshold

Newsletter

A short sentence describing what someone will receive by subscribing