How Treated Water Quality Changes at the Tap with the Autotrol System
When water passes through the Autotrol Dry, Itchy Skin System, the hardness minerals primarily calcium and magnesium are reduced or conditioned to decrease their drying effect on skin. This system works by modifying hardness characteristics so that treated water feels gentler during use. Consequently, water from taps, showers, and baths will generally be easier on skin, reducing the sensation of dryness that untreated hard water may aggravate.
Fixtures and Appliances First Affected by Water Treated with Autotrol
Showers and bathroom faucets are the first fixtures where changes are noticeable because these are the primary points of direct skin contact. Kitchen faucets and laundry use follow, although skin response is less immediate in those contexts. Appliances such as dishwashers and water heaters experience less mineral buildup due to modified hardness, but the system’s impact is primarily designed around improving water’s feel and effect on skin rather than appliance longevity.
Understanding 'Detected,' 'Median,' and 'Range' in Delta County Water Sampling
Government sampling in Delta County’s aquifer 368PRDC showed hardness measured as calcium and magnesium combined. Three discrete results taken from two wells between 2011 and 2015 reported values ranging from 219 to 237 milligrams per liter, with a median of 227 mg/L. 'Detected' means instrumentation found measurable hardness at those levels. The 'median' is the middle value of those samples, illustrating a typical concentration in this area’s groundwater. 'Range' shows the span between the lowest and highest samples, indicating variability in natural conditions over time and depth.
Why Aesthetic Secondary Standards Differ from Health-Based Limits for Hardness
Water hardness has an aesthetic secondary standard governing taste, appearance, and potential staining, but it is not a health-based limit. The reported measurements for Delta County wells did not exceed any federal health thresholds. This means hardness levels pose no known safety risk though they may affect user comfort, causing sensations like dryness or skin irritation. Understanding these distinctions helps clarify why water hardness treatment addresses comfort rather than safety concerns.
How Hardness Enters Groundwater in Delta County
The calcium and magnesium hardness in Delta County’s groundwater aquifer 368PRDC mainly results from natural geological formations. Water percolating through bedrock and soil dissolves minerals, increasing hardness concentrations. The sampled wells, located at depths between 290 and 305 feet, reflect this typical influence of local bedrock minerals on water quality rather than contamination. This natural process varies slightly by location and time, explaining the range in hardness values recorded.
For households noting dry skin possibly linked to water use, measuring their own water’s hardness is advisable to confirm if Delta County’s typical conditions apply to their supply. Based on such measurements, the Autotrol Dry, Itchy Skin System ships ready to configure as a targeted approach to adjust water hardness effects, helping ease dry skin symptoms correlated with this constituent level and local groundwater characteristics.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2015-07-29. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 368PRDC aquifer (Delta County): 3 results from 2 wells, median 227.0 mg/L, range 219.0-237.0 mg/L; none above any federal threshold