Government sampling by the U.S. Geological Survey found chloride present in all 51 groundwater samples taken from 11 wells in McLean County's aquifer 110QRNR between 2010 and 2018, with concentrations ranging from 4.03 to 108.0 mg/L and a median of 22.1 mg/L. None of these results exceeded federal thresholds.
How should I start checking what causes corrosion in my water?
Begin by verifying the water’s chemical and physical characteristics through simple observations and inexpensive tests before considering laboratory analysis. Look for visible signs such as blue-green staining on plumbing fixtures, metal discoloration, or unusual taste and odor. Check your plumbing condition and any changes in water clarity or pressure. If these signs suggest corrosion, a water chemistry test focusing on pH, alkalinity, chloride concentration, and other relevant parameters will help identify corrosivity. Professional water labs offer comprehensive testing to confirm corrosive tendencies accurately.
What additional concerns do commercial or industrial water users have that differ from a household’s needs?
Commercial and industrial operations often face higher water volumes and more sensitive equipment, making water corrosivity potentially more damaging and costly. They must consider equipment material compatibility, scaling or leaching effects on machinery, and regulatory compliance for discharge. These entities also require regular monitoring of system pressures, flow rates, and corrosion rates over time, often using corrosion coupons or sensors, which are typically beyond household scope. In contrast, residential use focuses on maintaining plumbing integrity and appliance longevity.
How does water treated by a Pentair Corrosive Water Damaging Pipes Filter differ at the tap?
Once water passes through the Pentair system, it is conditioned to reduce corrosive factors affecting pipes and fixtures. This treatment stabilizes pH and reduces chloride impact on metal surfaces, helping prevent leaching and deterioration. The result is water that is gentler on plumbing materials, minimizing staining, pinhole leaks, and metal taste. Households may notice improved appliance performance and prolonged lifespan of plumbing components without changes in water clarity or hardness.
Can I compare McLean County’s water quality record with that of a neighboring county to assess my risk?
Comparisons with nearby counties can provide context but must be interpreted carefully. Different aquifers and sampling depths influence water chemistry significantly. Variations in chloride concentration ranges and medians between areas do not predict individual well conditions. Each household’s water source is unique and can only be accurately assessed through its own testing. Therefore, while regional data suggest general tendencies, they cannot substitute for direct analysis of your water supply.
How does the Pentair treatment system reduce or neutralize corrosive components in the water?
The Pentair system uses advanced filtering and conditioning methods to counter corrosive agents like chloride ions that contribute to pipe degradation. It modifies water chemistry to balance pH and minimize corrosive ion activity, often by adding protective compounds or removing reactive substances. This process reduces the water’s potential to leach metals from piping and fixtures, thereby protecting household plumbing and maintaining water quality at the tap.
What should I not assume based on area water sample data?
It is important to understand that government sampling results reflect conditions in the general McLean County aquifer 110QRNR area and cannot specify your home’s water quality. Detected chloride levels do not indicate a violation or pose a safety risk by themselves. Only a detailed analysis of your specific well or water supply can establish your water’s corrosivity. Existing equipment performance issues may signal the need for treatment solutions like the Pentair Corrosive Water Damaging Pipes Filter, but they require confirmation through testing tailored to your household.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2018-08-01. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Chloride in the 110QRNR aquifer (McLean County): 51 results from 11 wells, median 22.1 mg/L, range 4.03-108.0 mg/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.