Fleck Corrosive Water Damaging Pipes Filter

Buy Now

View full details

Government groundwater sampling in Lee County’s 230SDMR aquifer demonstrates a broad pH range from acidic to slightly alkaline conditions. Fifty-six samples from 53 wells, taken between April and August 2012 at depths ranging 60 to 370 feet, show a median pH of 6.7 standard units. Twenty of these results register below the EPA secondary standard lower bound of 6.5. This pH range indicates that some water sources in this area may be corrosive, affecting household plumbing and fixtures.

Sequencing the Evaluation of Corrosive Water at Home

Homeowners should begin by reviewing any recent water quality data for their well or tap. If no test exists, initial checks include observing plumbing condition for signs of corrosion such as staining, leaks, or unusual taste. The next step is to obtain laboratory testing for water pH and metals associated with corrosion effects, conducted by a certified facility. These tests confirm whether acidic water is a current concern and quantify its degree, informing treatment choices.

Secondary Aesthetic Standards versus Health-Based Limits for pH

The EPA’s secondary standard for pH, ranging 6.5 to 8.5, aims at maintaining water aesthetics and minimizing corrosiveness, not safeguarding against health hazards. A pH reading below this standard signals increased acidity, which may speed corrosion of pipes and fixtures, but does not itself constitute a health violation or unsafe condition. Understanding this distinction helps homeowners prioritize corrective measures based on physical impacts rather than health risks.

Interpreting Certified Laboratory Reports for Corrosive Water Constituents

Certified lab analyses for water pH report results in standard units, reflecting the balance of acidity and alkalinity. A reading below 6.5 suggests acidic water potentially harmful to plumbing, while results above 8.5 may indicate alkalinity issues. Reports also document metals such as copper or lead that may leach due to corrosion, offering a clearer picture of water’s effect on household systems. Accurate lab data is essential for matching treatment to water conditions.

Essential Information to Collect Before Exploring Treatment Options

Before selecting water conditioning equipment, note the following: the exact pH level and range from lab tests, presence and concentration of metals linked to corrosion, plumbing materials and age, well depth if applicable, and any historical water quality reports. This information clarifies the specific corrosiveness challenges and underpins informed treatment decisions tailored to the household’s water profile.

How Treated Water Changes at the Tap with Targeted Filtration

When treated with the Fleck Corrosive Water Damaging Pipes Filter, water’s acidity is neutralized or adjusted to reduce corrosive potential, protecting pipes and fixtures from accelerated wear. This treatment can improve water taste and reduce discoloration or staining caused by corrosion. Post-treatment water fosters longer-lasting plumbing infrastructure and a better-quality flow at the faucet.

Choosing the Fleck system directly addresses corrosive water concerns identified through testing and observation, offering a ready-to-configure solution that matches the demand reflected in local water conditions and personal measurement. Properly applied, it helps extend plumbing life and maintain household water quality.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2012-08-09. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of pH in the 230SDMR aquifer (Lee County): 56 results from 53 wells, median 6.7 standard units, range 4.3-8.6 standard units; EPA secondary standard for pH is 6.5-8.5 (aesthetic/corrosivity, not health-based); 20 of 56 sampled results fell below 6.5