How many samples and wells stand behind the figures, and what a small sample means
The copper stain data available for aquifer 112DFSF in Connecticut comes from three sample results collected from two separate wells. These wells were sampled between September 30, 2011, and September 6, 2017. The wells were shallow, with depths ranging from 19 to 24 feet. This modest sample size provides a snapshot but not a definitive picture of copper presence across the entire area. Small datasets can reflect local conditions but may not capture full variability in copper levels throughout the aquifer.
The order in which to rule things out, from cheapest check to laboratory test
If copper stains are visible in your household plumbing or fixtures, start by confirming the source is actually copper and not other minerals or metals. Visual inspection and simple home cleaning can differentiate copper stains from iron or other deposits. Next, testing your home's water is critical: a certified laboratory analysis measuring copper concentration will clarify whether copper is present and at what levels. Relying on area-wide data alone cannot specify your household’s copper levels.
How the constituent enters groundwater or the distribution system in this region
In aquifer 112DFSF, copper detected in groundwater most often comes from natural rock and soil leaching, influenced by geochemical conditions such as pH and water oxygenation. Corrosion of household plumbing materials can also contribute copper to the water within distribution systems. Knowing these sources aids in diagnosing whether the staining is caused by groundwater copper or by the interaction of water with pipes inside your home.
How sample depth, well depth or source type changes what a reader should expect
The samples from this area come from relatively shallow wells (19 to 24 feet), which generally sample unconfined groundwater that may be more susceptible to surface influences. Deeper wells or municipal systems may have different copper profiles due to variations in aquifer geology and treatment practices. This means your own water source depth and type can influence how much copper is likely present.
How to compare this area's record with a neighbouring county's without overreading it
When comparing copper data from aquifer 112DFSF in Connecticut with nearby counties, consider differences in geology, well depths, and sampling timeframes. Each area’s copper levels reflect local factors, so direct comparisons should focus on trends rather than absolute numbers. Differences in measurement methods or wells sampled can also affect reported copper concentrations.
How seasonal or multi-year variation shows in the record (dates and ranges given)
The copper concentrations detected in area wells over a span of nearly six years ranged from 1.5 to 37.6 micrograms per liter, with a median of 5.2 micrograms per liter. No samples exceeded federal thresholds for copper in drinking water. Seasonal or annual variations in copper can result from changes in water chemistry, flow patterns, and aquifer recharge. This indicates that while copper presence fluctuates, it has remained below action levels in the samples taken.
For households weighing treatment options for copper stains, the Pentair Blue-Green Copper Stains Filter is a documented option designed to address copper-related staining issues effectively based on demand figures you obtain from testing your water. This system ships ready to configure for residential use and can help reduce copper stain formation when appropriately matched to your measured copper levels.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2017-09-06. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Copper in the 112DFSF aquifer (FIPS 170): 3 results from 2 wells, median 5.2 ug/L, range 1.5-37.6 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.