If Your Well Depth or Water Source Differs, Expect Variation in Water Quality
Government sampling in Wasatch County's aquifer includes wells ranging from 19 to 105 feet deep. These measurements provide a regional overview, not specifics about any single residential well. Well depth can influence water composition because deeper wells often tap different aquifer layers with distinct dissolved solids levels. Similarly, the water source type—whether groundwater from the aquifer or surface water blended into home supply—affects what to expect in water quality. Thus, your well's depth and source can cause your water's total dissolved solids (TDS) to be lower, higher, or within the reported regional range.
If You Confuse Total Dissolved Solids With Health Contaminants, You May Misjudge Your Water
Total dissolved solids measured in this area range widely, with a median at 251.5 mg/L and values from 0.16 to 909.0 mg/L. These values affect water's taste, hardness, and potential to stain fixtures but do not directly indicate health risks. Unlike health contaminants, TDS is an aesthetic measure and not a safety standard. Understanding this distinction helps prevent confusion between aesthetic water concerns and actual safety issues, which require different testing and treatment approaches.
If You Want to Understand Your Water, Start With Simple Checks Before Lab Tests
Begin evaluating your well water by observing characteristics like taste, color, and staining. These can provide initial clues about dissolved solids or other aesthetic factors. Next, basic home water test kits might measure TDS or hardness. For precise analysis, especially if you suspect higher TDS levels or other constituents, a certified laboratory test is necessary. This step confirms specific concentrations and helps determine whether a treatment system like the Autotrol Complete Well System is appropriate.
If You Compare Wasatch County to Nearby Counties, Use Data Carefully Without Overreading
Comparisons between Wasatch County aquifer data and neighboring counties can show general trends in TDS or other water qualities. However, since aquifer composition varies locally and sampling depths differ, these comparisons should be viewed as broad context rather than exact predictors. Avoid assuming that neighboring county figures reflect your residential well’s condition. Focus instead on area-specific data and individual testing results.
If You Receive a Laboratory Report for Total Dissolved Solids, Here’s How to Interpret It
A certified laboratory report details TDS concentration in milligrams per liter (mg/L). Values below 500 mg/L are common and generally correspond to pleasant taste and minimal staining. Levels above this secondary standard, detected in 13 samples within Wasatch County, suggest increased potential for taste changes or staining but not health concerns. Understanding this helps set realistic expectations about water quality and guides decisions about treatment options.
If You Rely on Public Water System Records, Know What They Show Compared to Private Wells
Public water systems undergo regular testing and report data publicly, often including TDS measurements. These records typically cover treated water delivered to multiple users, reflecting system-wide conditions rather than any single home. Private wells, by contrast, vary locally and require individual sampling to establish precise quality. For private well owners in Wasatch County, government aquifer sampling provides a useful reference but does not replace the need for your own water analysis to confirm conditions.
The U.S. Geological Survey's aquifer data for Wasatch County, compiled from 168 samples over multiple wells, offers regional insight into total dissolved solids in groundwater from depths of 19 to 105 feet. This data is valuable for understanding typical water characteristics but does not specify your well’s exact TDS level or water quality. For homes experiencing elevated TDS or related aesthetic concerns, the Autotrol Complete Well System ships ready to configure, providing treatment capacity up to 32,000 grains to address comprehensive water conditions with proven technology. For detailed information, consult the original U.S. Geological Survey source and consider certified lab testing tailored to your well.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2025-09-03. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Total dissolved solids in the aquifer (Wasatch County): 168 results from 5 wells, median 251.5 mg/L, range 0.16-909.0 mg/L; 13 above an AESTHETIC secondary standard only (secondary standard 500.0 mg/L (aesthetic)) - not a health finding
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.