Complete Well Water Treatment in Johnson County: Understanding Local Water Quality Challenges

Myth 1: Complete Well Issues Always Involve High Total Dissolved Solids Levels

Government sampling of wells in Johnson County's aquifer 111ALVM shows total dissolved solids (TDS) levels ranging from 0.43 mg/L to 617.0 mg/L, with a median of 373.0 mg/L based on 15 samples across four wells. While some samples recorded TDS above the secondary aesthetic standard of 500.0 mg/L, this threshold addresses taste and staining rather than health or safety. It is important to recognize that detection of TDS in this range is common and not necessarily indicative of a problem specific to your well. Distinguishing complete well concerns from other water issues requires testing your own water, as area data provides only a regional context.

Myth 2: Household Fixtures and Appliances Are Equally Affected by Water Quality Issues

Not all fixtures respond the same way to elevated dissolved solids or other water quality factors. Appliances that use water continuously or heat it, such as water heaters, dishwashers, and washing machines, are often the first to show effects like scaling or reduced efficiency. Faucets and plumbing fixtures may experience staining or buildup depending on TDS levels and other constituents. Understanding which parts of your home are most vulnerable helps prioritize treatment options and maintenance.

Myth 3: Treated Water from a Single System Is Uniform Across Different Homes in the Same Area

The Fleck Complete Well System provides a documented solution designed to address total dissolved solids and related concerns through a 32,000 grain capacity process. When configured for household use, it reduces dissolved solids that affect taste and appearance, delivering improved water quality at the tap. However, results vary based on each well’s unique profile. The system ships ready to configure, allowing customization to local water characteristics once personal testing is performed.

Myth 4: Public Water Records Are the Same as Testing Your Private Well Water

Government data for Johnson County wells reflect broad aquifer conditions and are not specific to any single well. Public records help establish baseline conditions but do not replace testing of your home’s water supply. Well depth, local geology, and usage patterns influence water quality uniquely. Reliable treatment decisions require sampling your own water and evaluating it alongside area records.

Myth 5: Detection, Median, and Range Are Terms That Indicate Water Safety Risks

The terms 'detected', 'median', and 'range' describe how often and at what levels a constituent appears in sampled wells. In this context, 'detected' means the measurement instrument found total dissolved solids in all 15 samples; 'median' 373.0 mg/L indicates the middle concentration value; 'range' from 0.43 to 617.0 mg/L shows variability over time and location. These do not imply health risks or violations but provide a statistical overview essential for understanding local water quality variability.

In summary, this overview clarifies that government sampling in Johnson County’s aquifer indicates typical dissolved solids levels with some aesthetic variations, not safety concerns. Proper evaluation involves personal water testing and, if needed, employing a treatment solution like the Fleck Complete Well System to improve water quality tailored to your home's needs.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2017-08-28. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Total dissolved solids in the 111ALVM aquifer (Johnson County): 15 results from 4 wells, median 373.0 mg/L, range 0.43-617.0 mg/L; 4 above an AESTHETIC secondary standard only (secondary standard 500.0 mg/L (aesthetic)) - not a health finding