How the Treated Water Differs at the Tap Once the Documented Technology Is in Place
Total Dissolved Solids Level Adjustment
Water treatment technologies like the Autotrol Complete Well System reduce total dissolved solids (TDS) in well water by filtering and conditioning the water before it reaches your faucets. This results in clearer water with improved taste and reduced potential for mineral deposits on fixtures and appliances.
Consistent Water Quality Across Household Uses
The system helps maintain even water quality for cooking, bathing, and cleaning by managing dissolved solids consistently, which can minimize scaling and spotting commonly caused by high TDS.
The Role of Plumbing Material and Age, Separate from the Source Water
Impact of Older Pipes on Water Appearance
Even with well-treated water, older plumbing materials can alter water appearance, sometimes causing discoloration or deposits unrelated to source water TDS levels measured by government sampling.
Material Choices Affect Corrosion and Staining
Materials like galvanized steel or certain copper alloys may interact with dissolved minerals differently, potentially causing localized staining or taste changes even if the source water has acceptable TDS.
How to Compare This Area's Record with a Neighboring County's Without Overreading It
Focus on Government-Reported Median and Range
In Gwinnett County aquifer 320CRSL, USGS data shows a median TDS of about 59.13 tons per acre-foot with a range from 0.16 to 188.0 tons per acre-foot. Comparisons to neighbors should respect sample depth, area geology, and testing dates rather than treating differences as immediate cause for concern.
Avoid Assuming Similar Levels in Every Well
Regional data represent area-wide samples, not your specific well. Neighboring counties may have different geology or groundwater flow characteristics, affecting TDS differently.
How the Constituent Enters Groundwater or the Distribution System in This Region
Natural Mineral Dissolution Processes
TDS largely consists of minerals dissolved from surrounding rock and soil in the aquifer 320CRSL. This natural process introduces varied mineral content into groundwater depending on depth, local geology, and hydrological conditions.
Influence of Aquifer Depth on TDS Variation
The sampled wells in this area ranged from 280 to 600 feet deep, contributing to the observed TDS range. Deeper or shallower wells may see different levels based on contact with mineral deposits.
A Worked Example: Reading the Record's Median and Range as a Homeowner Would
Understanding Median TDS Concentration
The median TDS concentration of 59.13 tons per acre-foot indicates a middle value for measured wells in the area, meaning half the results are higher and half are lower. This value suggests typical conditions for Gwinnett County wells tapped into aquifer 320CRSL.
Interpreting the Range From 0.16 to 188.0 Tons
The range illustrates variability in TDS across different wells and times sampled. A single well’s TDS might fall anywhere within this span depending on local conditions.
What the Measured Range Means Against the Relevant Federal Standard, and What It Does Not Mean
No Federal Threshold Exceeded in Government Sampling
None of the 26 USGS sample results for wells in Gwinnett County aquifer 320CRSL exceeded federal water quality thresholds. This means the detected TDS levels are within regulatory limits but does not indicate water safety for any particular well.
Detecting TDS Is Not Indicative of a Violation or Unsafe Water
Detection of TDS relates to measurable mineral presence, not a health hazard. Homeowners should not interpret these numbers alone as a safety issue but as part of comprehensive water quality evaluation.
Conclusion: Matching Treatment Capacity to Household Demand
For Gwinnett County residents with complete wells facing TDS concerns documented in area aquifer samples, the Autotrol Complete Well System offers a treatment solution designed to manage up to 32,000 grains of dissolved solids. Properly dimensioning this system based on your household’s water usage can help improve water quality effectively at your tap.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2013-06-18. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Total dissolved solids in the 320CRSL aquifer (Gwinnett County): 26 results from 9 wells, median 59.13 tons/ac ft, range 0.16-188.0 tons/ac ft; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.