Complete Well Water Treatment for Households in CT’s FIPS 140 Aquifer 112DFSF Area

If you are seeing unusual taste or staining at your taps in CT’s FIPS 140 area drawing from aquifer 112DFSF, your household water supply may be affected by total dissolved solids (TDS). Residents here relying on wells sometimes notice water quality changes when treatment equipment fails. This guide walks you through practical steps to clarify the situation before considering equipment solutions.

1. Check Basic Indicators of Water Quality at Fixtures and Faucets

Begin by observing taste, color, and staining around faucets or in appliances. Since some wells sampled in this area showed TDS ranging from very low values to as high as 2320 mg/L, aesthetic issues like unusual taste or mineral staining can occur if levels surpass typical secondary standards for TDS (500 mg/L). Such observations point to possible treatment needs but do not confirm safety or health concerns.

2. Follow a Regular Maintenance Schedule for Water Treatment Equipment

Household systems addressing complete well water typically require scheduled servicing to maintain effectiveness. The Fleck Complete Well System, for example, is designed with a 32,000 grain capacity to manage typical household demands. Regular checks of media condition and system settings ensure continued performance in reducing dissolved solids and related impacts.

3. Consider Additional Questions for Commercial or Industrial Users

Unlike residential settings, commercial operators must account for variable water demand patterns and potential regulatory requirements. They may test additional parameters or assess equipment sizing differently. For households, focusing on consistent water quality and treatment capacity usually suffices unless unusual usage or plumbing complexity exists.

4. Document Key Information Before Seeking Advice

Gather and note details such as the depth of your well, appearance and frequency of water quality changes, and any prior test results. Government area data indicates sampled wells in this aquifer were between 32 and 75 feet deep, with a median TDS of 206 mg/L. Individual well testing is essential to identify your specific water profile and inform appropriate treatment.

5. Understand How the Fleck Complete Well System Works on Total Dissolved Solids

This system reduces total dissolved solids primarily through ion exchange technology. It exchanges unwanted dissolved minerals for less problematic ions, improving taste and minimizing staining. The Fleck System is engineered for a 32,000 grain capacity, adequate for typical residential use in this area’s water quality context.

Conclusion: What Not to Conclude From Area Water Data Alone

Area groundwater data from government sampling offers valuable context but cannot substitute for testing your own well. Detection of total dissolved solids or exceeding aesthetic thresholds in nearby wells does not mean your water is unsafe or noncompliant. Only your well-specific water test can confirm the precise constituents and their concentrations to guide treatment choices.

By following these five steps, CT households experiencing complete well water issues can make informed decisions and consider solutions like the Fleck Complete Well System to improve water quality effectively.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2017-09-07. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Total dissolved solids in the 112DFSF aquifer (FIPS 140): 15 results from 4 wells, median 206.0 mg/L, range 0.18-2320.0 mg/L; 4 above an AESTHETIC secondary standard only (secondary standard 500.0 mg/L (aesthetic)) - not a health finding