Government sampling of groundwater in Burlington County, New Jersey, for aquifer 121CKKD shows that total dissolved solids (TDS) concentrations vary broadly among tested wells. From 2010 to 2024, 104 samples from 13 wells between 10 and 102 feet deep revealed a median TDS of 26.0 mg/L and a range from 0.02 mg/L to 327.0 mg/L, with no values exceeding federal safety thresholds. These results characterize regional water quality but do not specify the condition of any individual well.
If you want to evaluate treatment capacity relative to your household's water use
Complete well water treatment involves addressing all dissolved minerals and impurities your household water supplies contain, based on your demand. You should estimate your daily water usage, considering the number of residents and typical activities, to select a system with sufficient grain capacity. For many households in Burlington County, a system with a 32,000-grain capacity, such as the Fleck Complete Well System, matches common residential demand levels, ensuring effective treatment without frequent service intervals.
If you want to understand the difference between aesthetic secondary standards and health-based limits for total dissolved solids
Total dissolved solids in water refer to the combined content of inorganic salts and small amounts of organic matter. While TDS levels can influence taste, water clarity, and the potential for staining or mineral buildup, federal guidelines set for TDS are secondary standards focused on aesthetics and not enforceable health criteria. The Burlington County aquifer samples display TDS well within federally recognized safety bounds, indicating no health-based concerns even at the higher detected levels.
If you want to prepare clear information before seeking water treatment advice
Before considering treatment options, document these key details: your household’s average daily water consumption, any observed water quality concerns (taste, staining, cloudiness), and well specifications such as depth and source type. Importantly, arrange for a test of your own well water that measures total dissolved solids concentration. This information provides a precise basis for selecting proper treatment capacity and technology.
If you want to know how the Fleck Complete Well System addresses total dissolved solids in Burlington County water
The Fleck Complete Well System operates by effectively reducing the concentration of dissolved minerals and impurities that contribute to total dissolved solids. Its design enables removal through targeted filtration and ion-exchange processes calibrated for household-scale treatment. With a 32,000-grain capacity, this system balances treatment strength and operational duration, promoting consistent water quality improvement for complete well setups.
If you consider the impact of sample depth, well depth, or source type on water quality expectations
Water quality in Burlington County’s 121CKKD aquifer varies depending on the depth of sampling or well construction. Wells between 10 and 102 feet deep demonstrate a wide TDS range, reflecting geological diversity and the water’s interaction with soil and rock layers. Typically, shallower wells might show more fluctuation and potential influence from surface activities, while deeper wells tend to have more stable mineral profiles. Knowing your well’s depth and type will help anticipate typical TDS levels and treatment requirements.
In summary, the single, most informative step to settle your treatment choice is testing your own well water for total dissolved solids concentration. That precise result, combined with your household’s water demand and well details, enables confident selection of an appropriate complete well water treatment system such as the Fleck Complete Well System.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2024-06-05. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Total dissolved solids in the 121CKKD aquifer (Burlington County): 104 results from 13 wells, median 26.0 mg/L, range 0.02-327.0 mg/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.