Chromium-6 in Will County Water: How to Choose Treatment for Your Frankfort Home
Understanding the UCMR3 Survey and Its Limits for One Household
Purpose of the UCMR3 Monitoring
The U.S. Environmental Protection Agency’s (EPA) Unregulated Contaminant Monitoring Rule 3 (UCMR3) collected data to learn about possible contaminants like chromium-6 in public water systems nationwide, including Frankfort's municipal supply in Will County, Illinois. This survey helps assess the presence of chromium(VI) but is not a compliance test for individual homes.
Scope of Sampling and Reporting Levels
For the Frankfort water system, the UCMR3 included 20 sample results for chromium-6 taken between February and September 2014. None of these results showed chromium-6 presence above the reporting level of 0.03 micrograms per liter (µg/L), which equals parts per billion (ppb). Because these results come from the system-wide level, they do not specify the chromium-6 concentration at any single household tap.
Limitations for Homeowner Water Decisions
Since chromium-6 can vary at the point where water enters a home, homeowners must conduct their own water testing to establish their specific chromium(VI) levels. The public water system data alone cannot determine if a particular household’s water needs treatment for chromium-6.
Factors for Large Households, Second Homes, or Seasonal Properties
Variability in Water Use and Treatment Needs
A home with many residents or properties used seasonally may require a treatment solution designed for higher or less consistent water demand. Treatment capacity must match these usage patterns to maintain effective chromium(VI) management.
Storage and Usage Considerations
Water stored during periods of low use can affect water quality and the behavior of chromium-6. Different treatment setups may be preferable depending on usage frequency and water turnover rates.
Assessing Treatment Capacity Against Daily Water Demand
Estimate Household Water Consumption
Calculate the average daily water usage by your household members to select the right treatment equipment. A treatment device should be capable of handling peak demands without compromising performance.
Match Equipment Flow Rates to Usage
Choose a treatment solution with flow capacity suitable for your household size and water consumption. This ensures chromium(VI) contact time and exposure to the filtration media are sufficient for effective handling.
Chromium Oxidation State Changes: Well, Distribution, and Tap
Chromium Forms in Groundwater
Chromium naturally occurs typically as total chromium, comprising chromium-3 and chromium-6. In Frankfort’s groundwater supply, chromium-6 was not detected above the reporting level during the sampling period.
Transformations in the Water System
Chromium species can change oxidation state due to chemical reactions as water moves from the well through distribution pipes to the tap. Chromium-6 can reduce to chromium-3 under certain conditions, affecting its behavior and treatment needs.
Reading the Median and Range from the Water System Data
Chromium Detected in Frankfort's Water
Twenty samples recorded 10 detections of total chromium above 0.2 µg/L, with the highest concentration measured at 1.0 µg/L and a median detection of 0.3 µg/L. These concentrations are well below the federal maximum contaminant level (MCL) of 100 µg/L for total chromium.
Interpreting the Data for Home Decisions
The absence of chromium-6 detections above 0.03 µg/L suggests it is present at very low or undetectable levels at the system scale. Individual testing remains necessary to confirm your home's water status.
How Chromium-6 Enters Groundwater or Distribution in Will County
Sources of Chromium-6
Chromium-6 may enter groundwater through natural mineral deposits or human activities such as industrial processes. Groundwater supply in Frankfort draws from aquifers where these influences are variable.
Distribution System Influence
Water distribution materials and water chemistry can affect chromium species transformation but generally do not add chromium-6 to the water. The EPA record for Frankfort shows no health-based violations involving chromium-6.
What You Should NOT Conclude from This Area Data
The available water system data does not mean your household water either contains or is free of chromium-6 at any specific level. Detection limits and sampling scopes mean individual water quality can vary. Testing your home's water is the only way to determine if chromium-6 treatment is needed.
For households in Frankfort considering treatment options for chromium(VI), the Pentair Chromium-6 Filter ships ready to configure and can address hexavalent chromium when testing confirms its presence at treatment-relevant levels. Selecting the right capacity depends on your household water use and test results.
Where this information comes from
Source: EPA SDWIS public water system record. Sampled 2014-09-22. These figures describe the public water system's record, not the plumbing inside any individual building.
On record: EPA UCMR3 monitoring (2013-2015) for Frankfort (IL1970400), IL: 40 results across 2 listed contaminants, 10 detections above the reporting level; no federal MCL for hexavalent chromium; total chromium MCL 100 ug/L

