What Government Data Shows About Arsenic in Hendry County's Aquifer 112NRSD
The U.S. Geological Survey conducted groundwater sampling in Hendry County, Florida, specifically targeting aquifer 112NRSD. Fourteen separate well samples collected between April and June 2019 detected arsenic in every case. Concentrations ranged from 0.64 to 4.2 micrograms per liter (µg/L), with the median value at 1.5 µg/L. These wells were relatively shallow, ranging from 10 to 16 feet in depth. Notably, none of these measurements exceeded federal arsenic thresholds for drinking water.
Interpreting These Concentrations for Your Household
While these measurements provide important insights into arsenic presence in the regional groundwater, they do not indicate the precise arsenic level in your home's water source. Actual arsenic concentration depends on your well depth, local geology, and water source characteristics. To understand your home's arsenic level, you must conduct a water test from your specific well or tap.
Why Knowing Your Specific Arsenic Level Matters
- It determines the necessary treatment capacity for your household water system.
- It informs maintenance and monitoring schedules.
- It helps ensure effective reduction of arsenic to meet safety and aesthetic needs.
Key Factors in Sizing a Residential Arsenic Treatment System
Once arsenic concentration is known for your home, the system capacity should align with your daily water usage patterns and maximum contamination levels. Important considerations include:
- Daily Water Use: Estimating gallons needed per day is fundamental to system sizing.
- Peak Flow Demand: Treatment equipment should accommodate peak usage without compromising performance.
- Reducing Arsenic Concentrations: The system must effectively lower arsenic from your measured level down to acceptable limits.
How Reverse Osmosis Technology Addresses Arsenic
Reverse osmosis (RO) is a widely used technology that filters contaminants such as arsenic from water through a semipermeable membrane. Systems employing this technology can reduce arsenic concentrations significantly when properly configured to match water usage and contaminant level. The WSP 000 GPD Reverse Osmosis System - Commercial ships ready to configure for household use, allowing capacity adjustment to your specific requirements.
Benefits of the WSP 000 GPD Reverse Osmosis System
- High-efficiency removal of arsenic and other dissolved solids.
- Capacity suitable for a range of residential water demands.
- Compact design adaptable to your household water system.
Next Steps for Homeowners Considering Arsenic Treatment
Before selecting a system, testing your own water for arsenic levels is essential. Knowing local data helps understand the general range, but water quality varies by well and depth. After confirming your arsenic concentration, choose a treatment system that matches your water usage and arsenic content. The WSP 000 GPD RO system offers the flexibility and technology to address arsenic in Hendry County’s aquifer 112NRSD water sources effectively.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2019-06-05. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Arsenic in the 112NRSD aquifer (Hendry County): 14 results from 14 wells, median 1.5 ug/L, range 0.64-4.2 ug/L; none above any federal threshold