Understanding Arsenic in Alachua County's Aquifer 120UFAQ
Commercial operators sourcing water from aquifer 120UFAQ in Alachua County, Florida, face decisions about managing arsenic in their water supply. The U.S. Geological Survey sampled groundwater from this aquifer at depths ranging between 142 and 180 feet, recording arsenic in three separate results taken between June 2013 and January 2026.
The detected concentrations in these samples ranged from 0.19 to 1.5 micrograms per liter, with a median value of 0.27 micrograms per liter. Importantly, none of these results exceeded any federal arsenic threshold as defined for drinking water standards. This data describes the aquifer's water quality over time and provides context for commercial water users evaluating treatment needs.
What Arsenic Detection Means for Your Commercial Water
Finding arsenic in regional groundwater indicates the element is naturally present but does not by itself signify a safety concern or regulatory violation. Arsenic is a naturally occurring element that can be dissolved into groundwater from soil and rock. Federal regulations set maximum contaminant levels for arsenic in water used for human consumption to protect health.
Since these government measurements describe conditions across the aquifer rather than any single well or system, commercial operators should obtain precise arsenic testing of their own water source to determine specific concentrations. This on-site testing is necessary because local variations in geology and depth can cause arsenic levels to differ significantly from regional averages.
Assessing Treatment Options for Commercial Water Supply
When arsenic is present at concerning levels, selecting an effective water treatment method is crucial for commercial operations relying on clean water for their processes. Among available technologies, reverse osmosis (RO) systems are well documented for reducing arsenic concentrations by forcing water through a semipermeable membrane, which filters out dissolved contaminants.
The 1600 GPD Reverse Osmosis System is designed to handle commercial-scale water treatment with a daily capacity of 1600 gallons and comes equipped with a 4x40 gallon storage tank. This system ships ready to configure and can be integrated into existing water infrastructure to address arsenic removal as part of a broader treatment strategy.
What to Consider Before Selecting a System
- Water Testing: Confirm arsenic levels in your specific well or source to determine if treatment is warranted and at what capacity.
- Flow Rate and Capacity: Match treatment system throughput with your commercial water demand to maintain operational efficiency without interruption.
- Water Chemistry: Assess other water quality parameters that may affect reverse osmosis performance and membrane lifespan, such as turbidity and total dissolved solids.
- Regulatory Compliance: Ensure that your treatment solution aligns with any applicable state or federal regulations for water quality in commercial applications.
Conclusion
Government data for Alachua County's aquifer 120UFAQ shows arsenic is present in groundwater but below regulatory limits. For commercial operators evaluating water treatment options, it is essential to test your own water to understand your specific arsenic level. A 1600 GPD Reverse Osmosis System offers a reliable technology to reduce arsenic and provide treated water meeting quality expectations for commercial use.
Where this information comes from
Source: USGS groundwater sampling. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.