What Government Data Reveals About Acidic Water in Hendry County
The U.S. Geological Survey conducted groundwater sampling in Hendry County, focusing on aquifer 112NRSD. Between 2011 and 2019, samples were collected from 14 wells ranging in depth from 10 to 16 feet. The pH values in these samples ranged from 4.3 to 8.2 standard units, with a median value of 7.15 standard units.
The Environmental Protection Agency (EPA) secondary standard for pH in water is a range of 6.5 to 8.5 standard units. This secondary standard addresses aesthetic concerns and potential corrosivity of water but is not a health-based limit. Of the 30 samples collected, 3 measured pH below 6.5, indicating acidic or potentially corrosive water within this region.
What This Means for Your Household Water
The data reflect a range of pH levels found in the Hendry County aquifer but do not define the specific pH of your household water. To determine if your water is acidic, testing your own water source is necessary.
Acidic water, indicated by a pH below 6.5, can lead to issues such as metal corrosion in plumbing, staining on fixtures, and a sour taste. Addressing these problems requires selecting an appropriate treatment approach based on your water profile.
Technical Approaches to Managing Acidic Water
Households weighing their options typically consider two broad technical approaches:
- Neutralizing Systems: These generally use calcite or other media to raise pH by adding alkaline substances to water. They require media replacement over time and can influence water hardness.
- Chemical Feed Systems: These inject a controlled amount of neutralizing solution or chemicals to adjust pH. This approach provides precise control over water chemistry and has a consistent performance profile.
Key Considerations in Deciding Your Approach
Neutralizing systems may be simpler but can have variable outcomes depending on water flow and conditions. Chemical feed systems require configuration to match water usage but enable tighter control of pH adjustment.
Choosing an approach depends on your household's water usage, existing water quality conditions including hardness, and maintenance preferences.
A Documented Chemical Feed Solution for Acidic Water
The Total Well — Complete Chlorination Whole-Home System offers a chemical feed technology designed to address water quality issues like acidity. It ships ready to configure and supports water flows up to 9 gallons per minute, with a grain capacity of 48,000 and a 10x54 inch tank size.
This system controls pH by delivering measured chemical treatment throughout the home's water supply, reducing corrosivity related to low pH levels and improving overall water aesthetics.
What You Should Test to Confirm Needs
Before selecting a treatment, your household water should be tested for:
- pH level
- Total hardness
- Corrosivity indicators such as iron or copper levels
- Total dissolved solids which can affect taste and staining
Testing provides a precise profile so you can match your water characteristics with the most effective treatment technology.
Summary
Government sampling shows that acidic water does occur in Hendry County’s aquifer 112NRSD but with a wide range of pH conditions across the area. Your household water may or may not reflect these findings. Evaluating treatment options involves understanding the chemistry of your water and weighing neutralizing media versus chemical feed systems.
The Total Well chemical feed system is a documented solution designed to manage acidic water with precise control. Confirm your household’s water characteristics with testing to make an informed treatment choice tailored to your needs.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2019-06-05. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of pH in the 112NRSD aquifer (Hendry County): 30 results from 14 wells, median 7.15 standard units, range 4.3-8.2 standard units; EPA secondary standard for pH is 6.5-8.5 (aesthetic/corrosivity, not health-based); 3 of 30 sampled results fell below 6.5
The documented solution
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.