Understanding the pH Range in Citrus County's Aquifer 120FLRD
The U.S. Geological Survey conducted groundwater sampling from five wells across Citrus County, within the 120FLRD aquifer. These wells, ranging from 31 to 260 feet deep, were tested for pH levels between December 2011 and December 2012. The reported pH values varied from 6.8 up to 7.8 standard units, with a median at 7.25. Importantly, none of the sampled results fell below the U.S. EPA’s secondary standard lower threshold of 6.5 standard units.
pH is a measure of how acidic or basic water is, with lower values indicating acidity and higher values indicating alkalinity. While the EPA secondary standard sets a recommended aesthetic and corrosion control range from 6.5 to 8.5, it is not a health-based limit. Water that falls below this range tends to be more acidic and can cause corrosion in pipes and fixtures, leading to stains or metallic tastes.
What Acidic Water Means for Your Household
Acidic water may corrode plumbing components and damage appliances that rely on water flow. If your household water treatment equipment designed to neutralize acidity has stopped functioning, you might notice issues such as staining, pipe deterioration, or an unusual metallic taste.
However, since regional sampling does not measure your specific well or tap water, it’s important to perform an individual water test to determine your home's exact pH level and corrosion risk. This testing provides the information needed to confirm whether your water is acidic and requires treatment.
The Role of pH Neutralizer Filters in Addressing Acidic Water
When water is confirmed to be acidic, a pH neutralizer filter designed to adjust and balance the pH can be effective. The WSP Whole House pH Neutralizer Filter - Well Water, Acid Corrosion is engineered to raise low pH water to a more neutral level, thereby reducing corrosivity and protecting household plumbing.
This technology works by introducing a neutralizing medium that interacts with the water, increasing its pH in a controlled way. Because it treats all household water, it helps maintain balanced water quality for all uses, preserving fixtures and minimizing issues caused by acidity.
Next Steps to Manage Acidic Water After Failure of Existing Equipment
- Obtain a current water test focusing on pH and corrosion indicators specific to your home’s water source.
- Compare your results to EPA secondary standards to understand whether pH neutralization is warranted.
- Consider a direct-purchase pH neutralizer filter unit designed for whole house application to restore water balance promptly after equipment failure.
Addressing acidic water promptly helps prevent further damage and inconvenience related to corrosive water conditions. By understanding local water data and confirming your home’s water quality through testing, you can make an informed choice about using neutralization technology.
Where this information comes from
SourceUSGS groundwater sampling. Sampled 2012-12-13. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record U.S. Geological Survey sampling of pH in the 120FLRD aquifer (Citrus County): 10 results from 5 wells, median 7.25 standard units, range 6.8-7.8 standard units; EPA secondary standard for pH is 6.5-8.5 (aesthetic/corrosivity, not health-based); 0 of 10 sampled results fell below 6.5
The documented solution
WSP Whole House pH Neutralizer Filter - Well Water, Acid Corrosion
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.