Acidic Water in Connecticut’s FIPS 180 Area: Steps to Decide Your Household Treatment Class
$1,213.33
Fleck Acidic / Low-pH Water Filter
✓ Free shipping in the USA · ✓ 90-day returns · ✓ Secure checkout
1. Recognizing Household Indicators of Acidic Water
In your home, certain signs can suggest acidic water, but none confirm it. Acidic water typically shows a low pH, which can create a sour or metallic taste and may cause blue or greenish stains on plumbing fixtures due to dissolved metals. However, these signs alone do not definitively indicate acidity since other water qualities may cause similar effects. To be certain about your water’s pH level, you will need to test your own water directly rather than relying on regional data.
2. Comparing This Area’s pH Range with Nearby Counties
The US Geological Survey sampled 21 wells in the FIPS 180 area aquifer 112DFSF from 2010 to 2025, finding pH values ranged from 4.8 up to 7.1. Most results, specifically 202 out of 203, fell below the EPA’s secondary standard lower bound of 6.5, which indicates acidic water is common here. Neighboring counties may show different pH distributions due to varying geology and water sources. When reviewing other areas’ data, note that slight variations in median or range do not necessarily mean your well water is better or worse. Each well is unique and needs its own testing.
3. The Effect of Fleck Acidic / Low-pH Water Filter on Your Water
Once the Fleck Acidic / Low-pH Water Filter is configured for your home, it works to raise your water’s pH up into a neutral and less corrosive range. This adjustment helps reduce the risk of staining and metal leaching that acidic water can cause. After treatment, your water may taste less sharp or metallic, and plumbing surfaces may maintain a cleaner appearance over time, improving your household water experience without changing other water qualities.
4. Understanding 'Detected,' 'Median,' and 'Range' in Your Area's Sampling
In the USGS report for this region, 'detected' means pH was measurable in every tested sample. The 'median' of 5.5 means half the samples had pH values below this, half above. The 'range' from 4.8 to 7.1 shows the lowest and highest recorded pH values in the sampled wells. Importantly, these figures represent the general area’s groundwater, not your specific well. Also, falling below the EPA secondary pH range of 6.5 to 8.5 is not a safety violation but relates to water’s appearance and potential for corrosion.
5. How the Fleck System Treats Acidic Water
The Fleck Acidic / Low-pH Water Filter uses a neutralization process that adjusts the pH by adding alkaline substances, effectively neutralizing acidity. This treatment reduces corrosiveness and helps prevent issues like staining or metal leaching from pipes. The system ships ready to configure, allowing adaptation to your household’s water profile once you have tested your water’s current pH level.
6. Differentiating Acidic Water from Common Look-Alikes
Acidic water is often confused with hard water or water with high iron concentrations. Hard water primarily involves high mineral content causing scale buildup, which acidic water does not cause. Iron presence tends to discolor water reddish or brown, unlike acidic water’s blue-green staining. Testing your water for pH specifically will clarify if acidity is the concern rather than one of these other common water conditions.
Conclusion: The data for Connecticut’s FIPS 180 area aquifer 112DFSF shows a regional pattern of acidic groundwater, but these findings do not specify your household’s water quality. To understand your water’s pH and appropriate treatment needs, conduct a certified water test. The Fleck Acidic / Low-pH Water Filter can then effectively adjust your water’s pH to reduce related problems. Avoid assuming that area data alone dictates your water condition or treatment choice.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2025-11-21. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of pH in the 112DFSF aquifer (FIPS 180): 203 results from 21 wells, median 5.5 standard units, range 4.8-7.1 standard units; EPA secondary standard for pH is 6.5-8.5 (aesthetic/corrosivity, not health-based); 202 of 203 sampled results fell below 6.5