Fleck Acidic / Low-pH Water Filter

Buy Now

View full details

Is my water acidic if the community aquifer pH sometimes falls near the low end of the range?

A common misunderstanding is to assume that if a local groundwater sample shows pH close to the lower limit, your household water must be acidic or corrosive. However, the US Geological Survey sampled 3 wells in Allen County's N100GLCIAL aquifer between April 2022 and January 2024, and all 45 pH results were between 7.0 and 7.7 standard units. This range is well within the EPA secondary standard pH range of 6.5 to 8.5, which focuses on aesthetic qualities and pipe corrosion potential—not health safety.

What does this pH range imply about water quality in Allen County?

The median pH recorded was 7.2, indicating water that is generally neutral to slightly basic rather than acidic. Because none of the 45 measurements fell below 6.5, it does not suggest the presence of acidic water conditions in the sampled locations. Still, pH can vary locally and over time; these are regional samples from wells 10 to 12 feet deep, not a direct measure of your home's water. Only a direct pH test of your own water supply can determine your household’s specific situation.

How do I determine which treatment capacity matches my household’s water use?

Choosing water treatment equipment depends on knowing your household's daily water consumption. Treatment systems designed to address low-pH water, such as acid neutralization filters, come with rated flow capacities. Matching these ratings with your typical daily gallons needed ensures the system effectively processes the water volume without frequent maintenance or reduced performance.

What are the effects of untreated low-pH water over time?

If acidic water were present and left untreated, it might gradually cause plumbing corrosion, metallic taste, or staining due to increased pipe and fixture wear. However, since the regional data does not indicate low pH levels in Allen County aquifer wells sampled, these long-term risks do not appear typical here. Testing your water pH is necessary before deciding if treatment is warranted.

How does the local pH record fluctuate seasonally or over multiple years?

The sampling spanned from April 2022 to January 2024, covering nearly two years. Throughout this time, pH values remained consistently between 7.0 and 7.7 standard units, showing no significant seasonal or yearly decline into acidic territory. Such stability in the pH readings suggests minimal variation affecting acidity in this aquifer during the period sampled.

Are there additional considerations for businesses or industrial users in Allen County?

Commercial and industrial water users often require higher volume treatment systems and must consider water usage peaks, equipment compatibility, and process water standards. They may also need more frequent monitoring or customized filtration options. For households, these complexities are generally less significant but knowing your specific water usage and pH measurements can help you select an appropriate system.

For households measuring their daily water demand and seeking to address concerns about acidity, the Fleck Acidic / Low-pH Water Filter ships ready to configure and offers a documented technology tailored to neutralize low-pH water. Carefully aligning your household water use with the system’s capacity ensures effective treatment when needed.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2024-01-26. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of pH in the N100GLCIAL aquifer (Allen County): 45 results from 3 wells, median 7.2 standard units, range 7.0-7.7 standard units; EPA secondary standard for pH is 6.5-8.5 (aesthetic/corrosivity, not health-based); 0 of 45 sampled results fell below 6.5