Fleck Acidic Water + Hard Water (Well) System

Buy Now

View full details

If you assume your water’s acid and hardness levels match neighbors’, start by verifying your own water

A common misconception is that local or regional water quality automatically applies to every household’s well or water source within that area. Government samples from wells in Lenoir County’s aquifer 211CPFRU show a wide hardness range from 0.51 to 381.0 mg/L with a median of 17.3 mg/L. These samples come from wells 25 to 448 feet deep and reflect groundwater conditions regionally, not your individual well. To size treatment correctly, first rule out assumptions by testing your own water’s acid and hardness levels with a certified laboratory test.

If you know your household’s daily water use, then you can evaluate treatment system capacity

Once your water test results establish acid and hardness concentrations, next consider your household’s daily water demand. A treatment system must address total incoming mineral load based on volume and concentration. For example, a Fleck Acidic Water + Hard Water (Well) System with a 32,000-grain capacity can manage specific hardness loads calculated from test data combined with daily use estimates. Estimating gallons per day accurately helps avoid undersizing, which reduces effectiveness, or oversizing, which increases costs unnecessarily.

If you notice staining or taste issues, remember they relate to secondary standards, not health limits

The U.S. Geological Survey data reports no federal thresholds exceeded for acid or hardness in Lenoir County aquifer 211CPFRU samples. Secondary standards, such as total dissolved solids or chloride levels, affect aesthetics—like staining or taste—but do not imply a health hazard. Recognizing this difference prevents confusion about whether treatment is needed for safety or comfort. Testing your water provides clarity on how your personal water aesthetic compares to these secondary standards.

If your well is shallow or deep, understand it can influence mineral concentrations

The depth of a well impacts the water chemistry it supplies. In Lenoir County, sampled wells ranged broadly in depth, which corresponds to the variability in hardness detected. Shallow wells may yield different acid and hardness levels than deeper wells tapping farther into the aquifer. This variation reinforces the value of sampling your specific well. Knowing well depth alongside test results better informs the scale of treatment necessary.

If you observe scale buildup or corrosion on certain fixtures, identify why they appear first

Fixtures and appliances exposed continually or to hot water often reveal signs of acid and hardness problems before others. For instance, water heaters and faucets may show scaling or mineral deposits early. This is due to temperature effects accelerating mineral precipitation and the metal composition of plumbing reacting to acidity. Recognizing which fixtures exhibit issues first helps pinpoint the problem and estimate the treatment capacity needed for whole-house protection.

If your household water problem is confused with iron or manganese, note what makes acid and hardness treatment different

Acid and hardness primarily relate to calcium and magnesium mineral content, which causes scale and affects water’s pH. This differs from iron or manganese concerns, which involve distinct dissolved metals causing discoloration and specific odors. Treatment methods and sizing will vary accordingly. Confirming acid and hardness through proper analysis prevents misapplication of technology and ensures effective water treatment.

In summary, U.S. Geological Survey groundwater data for Lenoir County’s aquifer 211CPFRU covers samples from multiple wells with hardness detected at varying levels but no federal exceedances. This regional record helps frame expectations but does not replace individual water testing essential for correct sizing of an acid and hardness treatment solution like the Fleck Acidic Water + Hard Water (Well) System. Visit the U.S. Geological Survey site for detailed area water quality information.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2023-12-12. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 211CPFRU aquifer (Lenoir County): 5 results from 3 wells, median 17.3 mg/L, range 0.51-381.0 mg/L; none above any federal threshold