Government Data Show the pH of Local Wells is Usually Neutral to Slightly Basic
The U.S. Geological Survey sampled five wells in Hendricks County’s 112PLSC aquifer to measure pH levels from 2014 to 2025. Results from 61 samples showed pH values ranged between 7.0 and 8.2 standard units, with a median of 7.8. This means the water tends to be neutral to mildly alkaline in this area.
Before Choosing Treatment, Note Your Water’s pH and Hardness Levels
Recording your own well’s water test results, including pH and hardness, is essential before evaluating treatment options. Your water’s exact condition can differ greatly within the area. Arrange for laboratory testing to know how acidic your water is and how many grains per gallon of hardness it contains. This information helps match treatment capacity to your household needs.
The Federal pH Range Governs Appearance and System Longevity But Isn’t a Safety Threshold
The U.S. Environmental Protection Agency has a secondary standard for pH from 6.5 to 8.5, meant to address aesthetic factors like taste, staining, and plumbing corrosion. None of the 61 samples fell below 6.5. This range is not a health-based limit; detected pH values outside it do not indicate unsafe water. It only signals potential for corrosive effects or mineral precipitation.
Acid and Hardness Should Not Be Confused with Other Water Quality Issues
Acidic water (low pH) and hardness are distinct from problems like iron staining, sulfur odors, or microbial contamination. Acidic water can cause metal pipe corrosion and fixture wear, while hardness primarily causes scale buildup and reduces soap efficiency. Each requires different testing and treatment strategies.
Well and Sample Depth Influence Expected Water Chemistry
Samples analyzed were from wells 8 to 28 feet deep, fairly shallow groundwater. Deeper wells or different aquifers may have different pH and hardness profiles. Your own well depth and source type will inform what water quality issues to anticipate and test for.
Household Size and Usage Affect Treatment Needs for Acid and Hardness
Larger households or homes with greater water use will require treatment systems with higher grain capacity to effectively handle hardness, while second homes or seasonal properties might require different maintenance considerations. Knowing your household profile helps ensure treatment systems are appropriately sized.
Fixtures Most Sensitive to Acid and Hardness Are Those with Metal or Heating Elements
Water heaters, faucets, and appliances that heat water first show effects from acid and hardness. Acidic water can corrode metal parts, while hardness creates scale deposits that reduce heating efficiency and lifespan. Protecting these fixtures improves household comfort and reduces repair costs.
For homes in Hendricks County managing acid and hard water, the Fleck Acidic Water + Hard Water (Well) System is a documented solution. With a grain capacity of 32,000, it is designed to treat common hardness levels effectively while addressing pH-related water quality considerations for residential use.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2025-08-25. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of pH in the 112PLSC aquifer (Hendricks County): 61 results from 5 wells, median 7.8 standard units, range 7.0-8.2 standard units; EPA secondary standard for pH is 6.5-8.5 (aesthetic/corrosivity, not health-based); 0 of 61 sampled results fell below 6.5
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.