Description
If your water leaves orange-brown stains around sinks or toilets, or if your showers smell like rotten eggs, you’re likely dealing with iron and sulfur in your water. The WSP Whole House Iron & Sulfur Filter - Sentry Methane helps reduce these problems before the water reaches your taps, improving daily life around your home.
The problem you’re facing
Orange rings or spots in your toilet tank and around faucets are more than just an eyesore. They come from iron in your water. That rusty color also shows up on dishes and laundry, making whites look dingy. On top of that, if your hot water smells like rotten eggs, that’s usually caused by sulfur compounds. This smell can linger on towels and even affect the taste of your coffee. Both issues mean you’re spending extra time scrubbing surfaces, using more soap, and putting up with unwanted tastes and smells every day.
Why it’s happening
Iron gets into your water mostly from rusting pipes or from underground sources if you have a well. Sulfur smell is caused by hydrogen sulfide gas, a natural compound that can form in well water or in plumbing. The key way to confirm these is the rusty staining and the unmistakable sulfur smell when water runs, especially from the hot water tap.
What it’s costing you to leave it
Iron deposits build up inside appliances like water heaters, making them work harder and shorten their service life. You may also find yourself using more detergent to get laundry truly clean, and more time scrubbing surfaces to remove stains that get tougher the longer they sit. The sulfur smell won’t go away on its own—it can make everyday tasks less pleasant and even affect the taste of food and drinks made with tap water.
How this system fixes it
The WSP Whole House Iron & Sulfur Filter - Sentry Methane works by pulling air into the water flow, which helps release dissolved gases like hydrogen sulfide before the water reaches your taps. This process, called aeration, vents the sulfur gas safely outside your home. At the same time, the system helps reduce iron by exposing it to oxygen, which turns it into particles that can be filtered out, reducing staining and odors.
What this system can handle
This system is purpose-built for water with both iron staining and sulfur smell issues, including cases where methane gas is present in well water. It manages these gases by venting them outdoors through a dedicated pipe, keeping them out of your home. The system includes a 22-gallon bladder tank that maintains steady water pressure, so your water flow stays consistent. It handles typical household water volumes and cycles efficiently, meaning it won’t need constant attention. If you have a smaller or less severe problem, this system offers more capacity and capability than basic filters.
What you actually get
The package includes a pressure vessel with a lifetime warranty on the tank itself, so the main body of the system is built to last. It also comes with a bypass valve at no extra cost, allowing your plumber to isolate the system for maintenance without interrupting water service to your home. For drainage, you receive 10 feet of discharge hose as part of the system. The control valve and electronics have their own manufacturer warranties.
Is this the right size for you
This system suits homeowners and facility managers dealing with ongoing iron and sulfur issues, especially where methane gas is involved. If your water problems are minor or you have a small household, a smaller unit might be more economical. Conversely, if you have very high iron levels or a large home with heavy water use, you may need a larger or additional system. Sizing is important to make sure the system runs efficiently without frequent servicing.
Living with it
Maintenance involves occasional backwashing and monitoring the venting system to keep it clear of blockages. The bypass valve makes servicing straightforward without shutting off water to your home. Routine checks every few months are enough to keep the system running well. While some attention is needed, the system’s design keeps upkeep manageable and predictable.
What it won’t do
This system focuses on reducing iron staining, sulfur smell, and methane gas from well water. It does not remove hardness minerals like calcium or magnesium, nor does it filter out sediment, bacteria, or chemical contaminants. For those problems, you’d need additional treatment solutions tailored to your water’s specific issues.
Why buy it from us
Water Softener Plus (WSP) ships this system directly from Tampa, Florida with free U.S. shipping included in the price. The parts are serviceable and available for years to come, backed by a lifetime warranty on the tank. We don’t use sealed disposable units, so you benefit from long-term value and easy repairs. Our team offers straightforward sizing advice based on real experience, and we stand behind this system with a 90-day money-back guarantee.
Included with this system
- Lifetime warranty on the tank. The control valve and electronics carry the manufacturer's own warranty.
- Bypass valve included, so the system can be isolated for service while water keeps running to the house.
- 10 feet of discharge hose for the drain line.
Specifications
| Type | Iron & Sulfur Filter |
|---|---|
| Included | Lifetime tank warranty · Bypass valve included · 10 ft discharge hose |
| WSP SKU | WSP-IS-SENTRY10ME |
| Shipping | Free U.S. shipping, included in the price |
| Ships from | Tampa, Florida |
| Returns | 90-day money-back guarantee |
What this system handles
- Orange-brown iron staining
- Rotten-egg sulfur smell
- Rust rings in toilets and tubs
- Staining on laundry
The next step
Order the WSP Whole House Iron & Sulfur Filter - Sentry Methane today to start reducing stains and odors in your water. Our sizing help is included to ensure it fits your home’s needs. With free shipping and reliable support, you can improve your water quality without pressure or fuss.
Overview
- 🇺🇸 U.S.-based support and expert assistance
- 🔧 Built with trusted, industry-standard components
- 🚚 Ships nationwide - freight-safe packaging
- 🏠 Ideal for residential and light-commercial systems
Specs (Typical)
| Max Operating Pressure | 125 psi |
|---|---|
| Max Water Temp | 100 °F |
| Electrical | 120 V AC |
| Flow Range | 5-45 GPM (model dependent) |
Related: Control Valves . Parts . Get sizing help

