60-inch WS2/2H/3 Injector Assembly for C-Series Valves — WS2/2H/3 Injector Assembly 60"

WS2/2H/3 Injector Assembly, 60" is the brine-draw injector group for larger Nelsen WS2, WS2H, and WS3 commercial control valves.

• Injector assembly compatible with WS2, WS2H, and WS3 valve platforms
• 60-inch configuration for tall commercial-scale tanks
• Generates the suction that draws brine or regenerant during the regeneration cycle
• Serves multiple valve models across the larger C-Series commercial range
• Shipping weight around 2.3 kg with the assembly and packaging
• Genuine Nelsen part for commercial WS-series valves

Fit this assembly on large WS2, WS2H, or WS3 systems when brine draw weakens or stops and the injector is fouled or worn. Its cross-compatibility across three valve platforms makes it a practical stocking spare for a mixed fleet of commercial systems. Confirm your valve model and the 60" length suit your tank height before installation, and clear any debris from the injector path during service.

The WS2/2H/3 Injector Assembly

This is a 60-inch injector assembly built for C-Series control valves in the WS2, 2H, and 3 family. The injector is one of the most important parts in a regenerating system: during regeneration it creates the suction that draws brine or regenerant out of the tank and meters it through the media bed at the right proportion. On larger tanks, the injector connects through a length of tubing, and this assembly is set up for that 60-inch reach.

Why the Injector Matters

If the injector is clogged, worn, or the wrong size, the system may fail to draw regenerant properly, and softening or filtration performance falls off even though everything else looks like it is cycling. Symptoms of a troubled injector include water that is no longer being treated the way it used to be, a regeneration that does not seem to pull down the regenerant, or brine that is not being drawn as expected. Since the small internal passages are prone to fouling from sediment or iron, the injector is a common service item on regenerating valves.

Fitment and Support

Servicing an injector generally means taking the valve out of service, accessing the injector, and cleaning or replacing it along with its screen and seals so it draws cleanly again. Because injectors are matched to valve type and tank size, using the right assembly is important. At Water Softener Plus we include documentation with your order and will gladly help you confirm this WS2/2H/3 injector assembly is correct for your C-Series valve before you buy.