Pot Sol Tnk, 18x33 For 1700 Brng (1/2)

Configured for Fleck valves that use 1700-series brining, the PT1833-05 is a Nelsen Brand 18" x 33" potable solution tank with a 1/2" brine-line connection. It stores and delivers the salt brine a water softener needs to regenerate its ion-exchange resin, and it comes factory-equipped with a Fleck 2350 safety valve to help prevent overfilling and protect against flooding in the event of a fill malfunction. Matching the tank's connection to your valve's brining type is essential for correct draw and refill behavior.

Role in a softener system

During each regeneration cycle, the softener draws brine from this tank to recharge its ion-exchange resin, restoring the resin's capacity to strip hardness minerals from your water and keep the home supplied with consistently softened water. The 1/2" connection on this model matches the higher brine-flow requirements of 1700 brining, and the included 2350 safety float shuts off incoming water at a preset level, an important safeguard for tanks installed in unattended basements and utility spaces where a failed fill could cause significant water damage.

• 18" x 33" potable brine and solution tank, Nelsen Brand
• 1/2" brine-line connection for Fleck 1700 brining
• Fitted with a Fleck 2350 safety valve
• Approximately 25 lbs for the tank assembly
• Related model PT1833-03 uses a 3/8" connection for 1600 brining
• Related model PT1833-07 uses a 3/4" connection for 1800 brining

When selecting or replacing a solution tank, always match the brine connection size and safety valve to your softener valve's brining setup so the system draws and refills the proper amount of brine and the safety device operates as designed. For dependable, leak-free regeneration cycles year after year, use clean, quality softener salt, keep the brine well free of debris and salt bridges that can interfere with draw, and periodically inspect the safety float to confirm it moves freely and seats correctly. The roomy 18x33 footprint also means generous salt storage, so refills are needed less often than with smaller tanks. Matched to a 1700-brining valve and kept clean and well stocked with salt, this tank will reliably support consistent softening for years to come. Its roomy footprint and rugged build make it a dependable long-term partner for any 1700-series softener.