Fleck Motor, 120 Volt 1 Rpm 50/60 Hz.

Keep your Fleck control valve cycling on schedule with this genuine Pentair Fleck drive motor, supplied at 120 volts with a 1 RPM output and rated for 50/60 Hz service. Listed under valve model 9500, it is the timer-drive motor responsible for rotating the cam stack that steps the valve through service and regeneration positions. Each turn of this motor is what carries the valve from backwash to brine draw to rinse and refill, so its steady rotation is fundamental to proper treatment.

This is the standard line-voltage version of the Fleck timer motor, making it the right choice when your softener or filter wires directly to household 120V power rather than a low-voltage transformer. Confirming both the voltage and the 1 RPM speed is essential, since an incorrect motor will throw off cycle timing and can leave the valve stuck or under-regenerating.

• 120-volt operation for direct line-power control heads
• 1 RPM output speed, 50/60 Hz compatible
• Genuine Fleck component listed for valve model 9500
• Compact 0.26 lb service part for straightforward replacement
• Restores reliable, programmed regeneration cycling
• Drop-in fit using the original mounting and wiring connections

Recognizing a failed timer motor

When a drive motor wears out, the most telltale sign is a valve that no longer advances: it may sit locked in backwash or brine draw, or hum quietly without turning. The downstream effect is hard or untreated water reaching the home because the resin or media never regenerates. A motor can also fail intermittently, regenerating some days and not others, which makes the symptom harder to pin down.

Verify that the cam and gear train rotate freely and that voltage is present at the motor leads before swapping the part, ruling out a binding cam or wiring fault. Always disconnect power and place the valve in bypass first, then transfer the wiring to the new motor exactly as it came off. Installing this matched 120V, 1 RPM motor returns your Fleck 9500-series control to smooth, dependable operation and protects the rest of the household plumbing from the effects of untreated hard water. Keeping a spare line-voltage motor on hand is good practice, since a quick swap restores regeneration and spares the household the inconvenience of hard water while you wait for a part to arrive.