Pentair Salt-Free Scale Control System

Buy Now

View full details

If you notice that your current water equipment isn’t fully keeping up with water hardness, you might see scale buildup in faucets or appliances despite ongoing treatment. This is a common concern for households drawing from New Kent County's aquifer 217PTMC.

If You Rely on Public or Shared Water System Records Instead of Private Well Tests

The U.S. Geological Survey’s sampling in this area found hardness, measured by calcium and magnesium, present in all five wells tested between April and June 2011. The median hardness was 9.67 mg/L with a range of 1.21 to 22.5 mg/L. These figures reflect multiple wells from depths of 299 to 789 feet but do not specify your own water quality. Public system data shows no federal thresholds were exceeded, meaning there were no violations for hardness or related water quality in these samples.

However, this data does not substitute for testing your specific household supply. Individual well water can differ significantly due to local conditions, plumbing, and usage patterns.

If Your Water Source Is a Private Well Drawing from Varying Depths in Aquifer 217PTMC

The depth of your well influences the water’s mineral content. The sampled wells ranged widely in depth, and hardness levels varied accordingly. Deeper wells often show different calcium and magnesium concentrations than shallower ones, altering how water behaves in your home. Understanding your own well’s depth can offer clues but does not replace direct water testing to know your hardness level exactly.

If You See Scale Buildup or Reduced Equipment Performance Despite Existing Treatment

Persistent scale on fixtures, spotting on glassware, or decreased efficiency of water-using appliances may indicate that the current system isn't fully controlling hardness. This is especially likely if your equipment is aging or undersized for your household’s water use. These signs point to a potential benefit from a salt-free scale control system designed to reduce scale without adding salt to the water.

If You Want a Straightforward Maintenance Routine for Your Water Treatment System

The Pentair Salt-Free Scale Control System ships ready to configure and requires routine checks to ensure optimal performance. Unlike salt-based softeners, it does not need salt refills, reducing ongoing maintenance. Periodic inspection and cleaning of pre-filters or system components help maintain scale prevention efficiency over time, matching well with a household’s regular upkeep habits.

If You Consider Plumbing Material and Age Separately from Water Hardness

Older pipes and fixtures can accumulate scale buildup more quickly due to surface roughness and corrosion, independently of the water hardness level. Plastic or newer metal plumbing reduces scale adherence but does not eliminate hardness minerals. Assessing plumbing conditions alongside water quality gives a clearer picture of household water treatment needs.

Reviewing New Kent County’s aquifer data reveals typical hardness levels and confirms no federal water quality limits have been exceeded in the area. Still, only a test of your household water determines your exact hardness level. If your existing equipment doesn't fully control scale, a salt-free scale control system from Pentair offers a maintenance-friendly solution that works alongside your plumbing setup. This approach can address scale issues without adding salt and fits households looking for effective, low-maintenance water treatment options.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2011-06-28. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 217PTMC aquifer (New Kent County): 5 results from 5 wells, median 9.67 mg/L, range 1.21-22.5 mg/L; none above any federal threshold