Autotrol Radon in Water Filter

Buy Now

View full details

What Does Radon Measurement in Deep Wells Mean for Your Household?

Laboratory test reports from the U.S. Geological Survey for wells in Union County's 124SPRT aquifer show radon-222 concentrations measured in 11 samples from 9 wells, taken between 2012 and 2014. These wells, ranging from 260 to 771 feet deep, present radon levels between 54.0 and 320.0 picocuries per liter (pCi/L), with a median value of 77.0 pCi/L. These figures reflect the area's aquifer characteristics rather than any single household’s water and do not indicate exceedances of federal standards.

Can Symptoms in Your Home Confirm Radon Presence in Water?

Radon is a radioactive gas that is odorless and invisible, making household symptoms unreliable for detecting its presence. Common water-related issues like taste, smell, or staining are unrelated to radon. To determine if radon is present in your well or household water, a specific water test is necessary. This is the only way to know your home's precise radon level and whether treatment is advisable.

How Should You Interpret Radon Data Comparing Union County to Nearby Areas?

Radon levels vary naturally between regions and aquifers. The 124SPRT aquifer's data provides a localized baseline but should be compared cautiously with neighboring counties’ readings to avoid overstating potential problems. Differences in geology and sampling depth influence concentrations, so regional comparisons help contextualize but do not define individual water quality.

Does Household Size or Property Usage Impact Radon Concerns?

Larger households or properties used seasonally may experience variations in water usage patterns, but these factors do not inherently affect radon concentration in the water supply. However, higher water usage can increase radon exposure through aeration during showers or cooking. Therefore, considering household demand is relevant when choosing treatment equipment capacity and configuration.

What Distinguishes Public Water System Records from Private Well Testing Regarding Radon?

Public water systems must regularly monitor and report water quality, but radon is not always included or is measured differently. Private wells can have radon levels that differ significantly from public systems due to individual hydrogeology. Thus, public records establish general area conditions but do not replace private well testing for homeowners relying on individual sources.

Which Household Fixtures Are Most Affected by Radon in Water?

Radon exits from water primarily through aeration processes, such as in showers, faucets, and humidifiers. These fixtures may release radon gas into indoor air, which is the main exposure route of concern. Water heaters and appliances that agitate water also contribute. Addressing radon in the water supply reduces this indoor air exposure potential.

What Should You Not Assume from Area Radon Data?

Area-wide measurements do not specify your home's water radon concentration. Detection levels indicate presence but do not imply violation of safety standards. Radon in water does not cause taste or odor issues. Prior to selecting equipment, testing your household water is essential to confirm your specific condition. For managing radon in water, the Autotrol Radon in Water Filter ships ready to configure and uses proven technology to reduce radon exposure when needed.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2014-08-12. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Radon-222 in the 124SPRT aquifer (Union County): 11 results from 9 wells, median 77.0 pCi/L, range 54.0-320.0 pCi/L; none above any federal threshold