Fleck Lead in Water Filter

Buy Now

View full details

1. What to Record From Your Lead Test Report

When you get a lead test report from a certified lab for your household water, it will list lead concentration in milligrams per liter (mg/L). Pay close attention to the 90th percentile reading, if provided. This value represents the level below which 90% of tested sites fall, reflecting the distribution in a water system or building. Also note any maximum detected values or whether lead was not detected at all. These figures focus on your specific water sample and plumbing situation.

2. How Plumbing Materials and Age Affect Lead Levels Independently of Source Water

Lead presence in your water often comes from household plumbing rather than the groundwater source itself. Older pipes, solder, faucets, and fixtures can leach lead into water, especially if plumbing predates regulations limiting lead content. Even if the source water has negligible lead, your home's plumbing materials and the water's corrosivity influence lead levels at your tap.

3. Sample Depth, Well Depth, and Source Type Influence on Lead Expectations

The Fernley Public Works water system draws from groundwater. Lead measures in public water system samples mainly reflect water after it has passed through distribution pipes and building plumbing. Sampling from deeper wells or directly at the source often shows lower lead levels because lead usually enters water within pipes. Hence, lead readings vary based on where sampling occurs.

4. How the Fleck Lead in Water Filter Reduces Lead in Household Water

The Fleck Lead in Water Filter is designed to reduce lead concentrations by employing filtration media and technology targeted at trapping and removing lead particles before water reaches your tap. The system ships ready to configure and is intended for residential use, acting as a final barrier to lead arising from plumbing or minor system contamination.

5. Interpreting the Fernley Public Works Lead Sampling Results Against Federal Standards

The EPA’s 2023 lead monitoring for Fernley Public Works shows a 90th percentile lead concentration of 0 mg/L in the sampled distribution system. This indicates that among the homes tested, 90% had no detectable lead in their water at the tap during that sampling period. The system has one health-based violation on record related to lead out of three total violations, showing there is a documented history of lead-related challenges but no exceedance was found in the latest monitoring cycle at the 90th percentile. No detection at the 90th percentile does not guarantee zero lead in every household tap, as local plumbing can cause variations.

6. Understanding 'Detected', 'Median', and 'Range' Terms in the Lead Sampling Record

Within sampling records, 'detected' means lead was measurable above the lab’s detection limit in some samples; 'median' is the middle value of all detected samples; 'range' shows lowest and highest lead levels found. For Fernley, the 90th percentile of lead was zero, indicating low overall distribution concentrations at sampling points. However, these statistics represent aggregated data and cannot specify individual home water quality.

Closing: To determine your household’s lead situation, order a certified laboratory test that measures lead concentration specifically from your tap water. A lead result close to zero will confirm minimal lead exposure, whereas any measurable lead suggests the consideration of treatment options like the Fleck Lead in Water Filter for reducing lead levels effectively at home.

Where this information comes from

Source: EPA SDWIS public water system record. Sampled 2023-12-31. These figures describe the public water system's record, not the plumbing inside any individual building.

On record: EPA SDWIS record for FERNLEY PUBLIC WORKS (NV0000062), groundwater supply, serving 23064 people: 1 health-based violations of 3 total; lead 90th percentile 0 mg/L