Dry Skin Is Often Blamed on Water Hardness, but Treatment Targets Specific Minerals
Many assume that dry skin problems in commercial buildings stem directly from hard water, but hardness itself—the concentration of calcium and magnesium dissolved in water—does not cause skin dryness in a straightforward way. Instead, water treatment systems like the 30 Fiberglass Tanks - Twin Unit Skid remove or neutralize these minerals by exchanging calcium and magnesium ions with sodium or potassium ions, reducing scale formation and improving water feel. This adjustment can alleviate symptoms experienced by occupants, but it specifically targets mineral content, not skin hydration directly.
Dry Skin Is Confused with Other Water-Related Issues Like Soap Residue or pH Effects
While hard water is commonly associated with dry skin, it is important to distinguish this from issues caused by soap efficiency or variations in water pH that might irritate skin. Both soap residue build-up and pH imbalances can affect skin comfort but are separate from hardness mineral content. Addressing mineral hardness through commercial water treatment focuses on improving water chemistry to prevent scale and improve comfort, not altering soap chemistry or pH.
Government Sampling Covers 21 Results from 11 Wells across Kent County’s Aquifer 112CLMB
United States Geological Survey data from this region provides 21 hardness measurements from 11 separate wells, sampled between 2011 and 2024. These wells range in depth from 9 to 100 feet. This dataset offers a broad picture of average mineral content in groundwater supplying the area but does not represent any one commercial facility’s water specifically. Testing your own source water is necessary for precise treatment needs.
Water Hardness in This Area Varies Over Time but Stays within Defined Ranges
The hardness values recorded range from 37.6 to 187.0 milligrams per liter with a median of 65.2 mg/L, showing moderate variation over years and seasons. This variation is typical for groundwater in this aquifer but remains consistently below federal thresholds related to water quality concerns. Such fluctuations affect treatment demand but generally fall within expected operational parameters for commercial treatment systems.
Selecting Treatment Capacity to Match a Whole Building’s Water Usage Is Essential
Commercial operators should estimate the total daily water demand of their facility to determine the proper scale of treatment equipment. The 30 Fiberglass Tanks - Twin Unit Skid is designed for building-wide application, able to handle large volumes by operating in tandem. Proper sizing ensures mineral reduction across all outlets, potentially mitigating widespread dry skin symptoms linked to mineral content.
Measured Hardness Levels in Kent County Are Well Below Any Federal Limits and Are Not Health Risks
No measurements in this dataset exceed federal thresholds or indicate a health concern. Hardness is regulated by aesthetic and secondary standards, primarily related to taste, staining, and pipe scaling, rather than safety. While addressing hardness may reduce dry skin discomfort, it should not be mistaken for a health-based water quality issue.
What You Should NOT Conclude from Area Data
These measurements do not define the water quality at your specific commercial site. Individual well or municipal water tests are necessary to identify exact water conditions. Moreover, a detection of hardness minerals is not a violation or cause for alarm on its own. Using commercial system skids like the 30 Fiberglass Tanks - Twin Unit offers a ready-to-configure solution tailored to building-wide treatment demands, but confirming your water profile through testing is the first step toward effective management of dry skin related to water factors.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2024-07-30. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 112CLMB aquifer (Kent County): 21 results from 11 wells, median 65.2 mg/L, range 37.6-187.0 mg/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.