Fleck City Hard Water + Iron System

Buy Now

View full details

Step 1: How water feels and looks at your tap after using a Fleck System

Once treated with the Fleck City Hard Water + Iron System, water typically feels softer and reduces the iron-related discoloration common with untreated city water in Portage County. You may notice less film on dishes and a reduction in rust-colored staining on sinks and tubs as the system uses ion exchange and filtration methods to address hardness minerals and iron particles.

Step 2: Which household fixtures and appliances reflect changes first and why

Fixtures and appliances that use water continuously, such as showers, dishwashers, and washing machines, show improvements quickly. Iron deposits and hardness scale that might cause spotting or affect water flow tend to diminish here first due to consistent water use and immediate exposure to treated water.

Step 3: Order to identify the presence and extent of hard water and iron in your water

To determine whether your household needs treatment, begin with visible signs like spotting, staining, or soap scum buildup. The next step is basic water hardness test kits found in retail stores. For precise iron levels and hardness, laboratory testing of your tap water is essential because government data only reflect regional aquifer conditions, not your specific supply.

Step 4: How to assess if Fleck System's 32,000-grain capacity fits your household demand

Consider the number of people and typical daily water use which averages about 75 gallons per person. The system’s 32,000-grain capacity means it can handle a substantial volume of hardness minerals before regeneration, generally suiting average household needs in Portage County. If your household water usage or hardness is significantly higher, additional capacity might be needed.

Step 5: How iron reaches your water in Portage County’s 100SDGV aquifer

Iron naturally occurs in groundwater due to the local geology of Portage County’s 100SDGV aquifer. The U.S. Geological Survey sampling from 27 wells in this aquifer between 2011 and 2024 found iron present in about 14 of 59 results, with concentrations ranging widely but always below federal health thresholds. This iron can dissolve into water over time, contributing to the hardness and discoloration seen in city water sourced partly from this aquifer.

Step 6: Understanding 'detected,' 'median,' and 'range' in government sampling results

'Detected' means the measurement instrument found iron at quantifiable levels in 14 sample results among 59 total samples; however, detection does not imply these levels pose health concerns. The 'median' concentration of 5.55 micrograms per liter indicates the middle value of iron measurements, while the 'range' from 3.8 to 2,860 micrograms per liter shows variability across wells sampled. None of these exceeded health-based regulatory limits, but some readings are high enough to affect water appearance or taste.

Closing: The definitive test to confirm your household water’s hardness and iron levels

Ordering a comprehensive laboratory water analysis that measures total hardness and iron concentrations at your tap is the crucial step. Results close to or above typical regional levels suggest that a treatment system like the Fleck City Hard Water + Iron System will address your household’s needs effectively.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2024-08-20. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Iron in the 100SDGV aquifer (Portage County): 59 results from 27 wells, median 5.55 ug/L, range 3.8-2860.0 ug/L; none above any federal threshold