Fleck Acidic Water + Hard Water (Well) System

Buy Now

View full details

Understanding the Local Aquifer and Water Delivery

Lake County's source water often comes from wells tapping into aquifer 110QRNR, where groundwater is drawn from depths of approximately 8 to 18 feet. This groundwater moves naturally through soils and rock formations before reaching household taps, carrying dissolved minerals and varying pH levels that affect water quality characteristics like acidity and hardness.

Sample Size and Geographic Data Support

Number of Samples and Wells Tested

Between 2011 and 2021, the U.S. Geological Survey collected 22 hardness measurements from 18 distinct wells in this aquifer. These data points form the basis for evaluating typical water conditions in Lake County's aquifer 110QRNR area, though individual well water can differ from these median values.

Limitations of Area Sampling

Because these are regional measurements, they do not replace water testing for individual household wells. Homeowners should obtain certified laboratory tests for their water to determine exact hardness and acidity levels for their specific supply.

Long-Term Effects of Untreated Acid and Hardness

Impact on Plumbing and Appliances

Persistent hardness minerals—calcium and magnesium in measured medians around 268.5 mg/L—can gradually cause scale buildup inside pipes and water-using devices. Acidic water may slightly speed metal corrosion, affecting plumbing longevity over time if left unaddressed.

Effect on Water Quality Experience

Hard water often results in reduced soap effectiveness and spotting on fixtures. Acidity changes may influence taste or promote minor discoloration but do not indicate health risks in this context.

Interpreting Certified Laboratory Water Tests

Reporting Hardness and Acidity

Laboratory tests specify hardness as milligrams per liter (mg/L) of calcium and magnesium combined, reporting values observed in the area ranging from 133.0 to 417.0 mg/L. Acidity is reported as pH value, which should be compared against regional and federal guidance, though no federal safety exceedances were noted in the sampled wells.

How to Read Results for Home Use

Understanding your household’s test values helps in deciding if treatment is necessary. High hardness and low pH together suggest considering a combined solution addressing both acid and hardness.

Industrial vs. Household Considerations

Additional Questions for Commercial Use

Industrial operations often assess water chemistry for process compatibility, scale control, and materials protection on a broader scale. Households primarily focus on comfort, appliance care, and plumbing preservation.

Household Focus

Residential users prioritize mitigating spot formation, water feel, and pipe scaling, rather than extensive chemical adjustments required by commercial needs.

Role of Plumbing Material and Age

Material Interaction with Acidic Water

Older metal pipes may react differently to pH variations compared to newer plastic or coated plumbing, impacting corrosion rates. Water hardness itself interacts mainly with mineral scale formation, independent of pipe material.

Separate from Source Water

Plumbing influences water quality delivery but does not alter the source water’s inherent mineral and acidity composition. Addressing both source water conditions and plumbing factors gives a comprehensive approach.

Summary

Lake County’s aquifer 110QRNR data show consistent hardness with detected but not excessive acidity in groundwater. Testing individual water confirms household conditions beyond regional data. Choosing a treatment like the Fleck Acidic Water + Hard Water (Well) System, which has a grain capacity of 32,000, can effectively address both hardness and mild acidity challenges based on certified water test results.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2021-06-22. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 110QRNR aquifer (Lake County): 22 results from 18 wells, median 268.5 mg/L, range 133.0-417.0 mg/L; none above any federal threshold