Descripción
This 18x33 blue brine tank assembly arrives ready to build a softener regeneration reservoir. Supplied by Nelsen Corp (part BT1833R-B474-GRID), the kit combines an 18-inch by 33-inch blue polyethylene brine cabinet with a 2400-series style brine valve and a support grid plate.
- Manufacturer: Nelsen Corp
- Part number: BT1833R-B474-GRID (alternate J7500)
- Tank size: 18" diameter x 33" tall
- Color: blue polyethylene
- Included: brine valve (474 / 2400-series) plus salt grid plate
- Round cabinet-style tank for salt storage
A brine tank holds the salt and the saturated brine that a softener draws during each regeneration cycle. The included brine valve and safety float control fill and draw so the system pulls the correct brine volume and does not overflow onto the floor, while the grid plate lifts the salt off the tank bottom to promote clean brine formation and reduce salt bridging and mushing. The round 18x33 footprint fits many mid-size residential softeners and slots neatly into a garage or utility corner. Confirm the valve air-check setting, float height, and overflow position match your control valve's cycle and salt dose before commissioning. A solid choice for replacing a cracked cabinet or assembling a new softener from individual components.
Overview
- 🇺🇸 U.S.-based support and expert assistance
- 🔧 Built with trusted, industry-standard components
- 🚚 Ships nationwide - freight-safe packaging
- 🏠 Ideal for residential and light-commercial systems
Specs (Typical)
| Max Operating Pressure | 125 psi |
|---|---|
| Max Water Temp | 100 °F |
| Electrical | 120 V AC |
| Flow Range | 5-45 GPM (model dependent) |
Related: Control Valves . Parts . Get sizing help