Stenner chemical feed pump, 10 GPD, 100 PSI, 110V — 45MHP10-110, Stenner 100psi, 10gpd, w/1/4 Kit, 110v, 45MJH2A1S
$925.42
Buy NowWhy This System Fits
Inside the box, you will find the pump unit, necessary tubing, and various fittings designed for easy connection to your existing water system. The pump is compact and designed for straightforward integration, ensuring that it can be placed conveniently in your desired location. With its reliable construction and user-friendly design, the Stenner FP30-115 is ready to deliver consistent chemical dosing for effective water treatment. This system is ideal for a range of applications, providing peace of mind that your water quality is being managed effectively.
Before You Begin: Gather Your Tools and Components
- Stenner 45MHP10-110 chemical feed pump
- 1/4-inch installation kit (included)
- Adjustable wrench
- Tubing and fittings compatible with your system
- Power source with standard 110V connection
- Chemical reservoir or supply tank
- Safety equipment as needed (gloves, eye protection)
Ensure all components are available before beginning to streamline the process. Read the manufacturer’s manual for additional safety and setup instructions.
Positioning the Pump
Select a stable, upright location near your water treatment system and close to your chemical reservoir. The pump’s compact design allows for flexible placement, but avoid extreme vibrations or sources of heat. Mount the pump securely using suitable brackets or shelves, ensuring it is accessible for future maintenance.
Connecting the Intake and Discharge Lines
Intake Line
Attach the intake tubing to the pump’s inlet port. Use the included fittings to ensure a tight, leak-proof connection. Submerge the intake tube into the chemical supply reservoir, making sure it reaches near the bottom but does not touch the reservoir’s bottom to prevent sediment ingestion.
Discharge Line
Connect the discharge tubing to the pump’s outlet port, routing it toward the point of chemical injection in your water system. Secure fittings firmly to prevent leaks. Ensure the tubing is free of kinks or obstructions to maintain a steady flow.
Electrical Wiring and Power Connection
Plug the pump into a standard 110V outlet. Verify that your electrical supply is stable to ensure consistent operation. Avoid extension cords or multi-plug adapters that could cause voltage drops.
Configuring the Pump for Correct Flow Rate
Adjusting the Pump Speed
The pump’s flow rate is set by its internal calibration, but you can fine-tune the dosing rate through the adjustment mechanisms provided. Refer to the included manual for specific instructions on adjusting the stroke length or dosing rate to reach approximately 10 gallons per day — suitable for your system’s scale and chemical requirements.
Testing the Setup
Once connected, turn on the pump and observe the flow. Check for leaks at fittings and tubing connections. Use a measuring container to verify the amount of chemical injected over a specific period, ensuring the pump’s output matches your desired dosing rate. Adjust as necessary for precision.
Final Checks and Ongoing Maintenance
- Ensure all fittings are tight and leak-free
- Operate the pump for a few minutes to confirm consistent flow
- Regularly inspect the intake tube for sediment buildup or debris
- Clean or replace tubing and fittings periodically to prevent blockages
- Test chemical feed rates routinely to maintain accuracy
By following this practical installation and setup process, you will optimize your chemical dosing system’s performance, helping your water treatment goals be achieved efficiently and reliably. Proper setup ensures safe operation, accurate chemical delivery, and long-lasting system health, making your investment in the Stenner pump a reliable component of your water management routine.
What Local Water Needs
Understanding the water chemistry in your area is essential for selecting the right water treatment system. Local water sources can vary significantly in terms of pH levels, hardness, and the presence of contaminants. For instance, if your area's water is high in iron or has elevated hardness levels, a chemical feed pump like the Stenner FP Series can help manage these issues effectively. By introducing the appropriate chemicals, you can neutralize acidity or prevent scale buildup, ensuring that your water remains safe and pleasant for everyday use.
Additionally, the Stenner FP30-115 is versatile enough to accommodate varying levels of chemical dosing needs based on your local water quality. This adaptability means that whether your water is slightly alkaline or more challenging, you can customize the system's output to achieve optimal water chemistry. This proactive approach to water treatment not only enhances the quality of your water but also prolongs the life of your plumbing and appliances.