Discontinued

This listing covers the Fleck Meter Cable for SE-series controls (part FL19121-01), associated with valve model 6700. The meter cable is the link that carries flow data from the valve's water meter to the SE electronic timer, allowing demand-initiated regeneration based on actual water usage rather than a fixed calendar schedule. It is, in effect, the nerve that connects what the valve measures to what the controller decides.

Please note this particular cable has been discontinued. It is listed here for identification and cross-reference; if your SE control needs a meter cable, confirm the current Pentair Fleck equivalent for your valve before ordering so you receive a supported part that fits your specific control head.

The role of the meter cable

• Transmits flow-meter signals to the SE-series electronic timer
• Enables efficient, demand-based (metered) regeneration
• Listed under valve model 6700, part of the meter cable service assemblies
• Very light service part at roughly 0.04 lbs
• Discontinued and retained here for reference and cross-matching
• A frequent culprit when an SE control loses its metering function

Metered control is what makes a modern softener efficient. By regenerating only when the measured volume of treated water has been used, it conserves salt and water compared with timer-only operation, which regenerates on a fixed schedule regardless of how much water the household actually consumed. Over a year, that difference adds up to meaningful savings and a smaller environmental footprint.

A damaged or disconnected meter cable can cause the system to stop regenerating on demand or to display erratic flow readings, often leading homeowners to suspect the meter or the timer board when the humble cable is the real fault. If you are troubleshooting an SE control that has lost its metering function, inspect the cable and its connections at both the meter and the timer board for breaks, corrosion, or a loose plug. Because FL19121-01 is no longer produced, contact us or your Fleck dealer with your valve model so we can identify the supported replacement cable for your specific control head. Once the correct supported cable is in place and securely connected, your SE control can again regenerate on actual demand, conserving salt and water while keeping the household reliably supplied with soft water.