What Does a Laboratory Test Report for Uranium-Radium in Pike County Water Show?
Government sampling of groundwater in Pike County's aquifer 341LRBW, conducted by the U.S. Geological Survey between 2012 and 2015, measured alpha particle activity as a proxy for uranium and radium presence. Across 122 results from 16 wells ranging from 125 to 610 feet deep, the median alpha particle level was 1.3 pCi/L, within a range of -0.7 to 13.9 pCi/L. Importantly, none of these measurements exceeded federal thresholds for safety. A household test report would show the alpha activity detected, but only a direct test of your water can reveal your home's specific condition.
If Uranium and Radium Are Naturally Present in Groundwater, How Do They Get There in Pike County?
In Pike County, uranium and radium reach groundwater primarily through natural geologic processes. These radionuclides derive from the decay of uranium-bearing minerals found in the regional bedrock and soils. Groundwater flowing through aquifer 341LRBW picks up trace amounts of these particles as it interacts with the earth’s mineral layers over long periods. This natural occurrence means that wells tapping into this aquifer have the potential to contain these constituents, though concentrations vary widely.
If You Choose the Fleck Uranium & Radium System, How Does It Handle These Radionuclides?
The Fleck Uranium & Radium System employs proven filtration methods designed to reduce alpha particle activity associated with uranium and radium in residential water supplies. Its technology targets the removal of these constituents by filtering them out of tap water, thus reducing radioactive particulate content to levels closer to or below detection thresholds. The system's capacity is rated at 32,000 grain, meaning it can handle typical household water demands efficiently when addressing uranium-radium concerns.
If This Problem Is Unmanaged, What Are the Long-Term Effects on Household Water?
When uranium and radium are present and untreated, their alpha radiation can remain in the water supply without visible changes. Since these particles do not affect taste, odor, or appearance, the issue can persist unnoticed for years. While the federal sampling in this area shows no exceedances of safety limits, it’s important to understand that ongoing presence means continual exposure through water usage. Treatment reduces this potential exposure by lowering the particulate levels in household water.
If You Use the Fleck System, How Will the Water at Your Tap Change?
Once the Fleck Uranium & Radium System is in operation, you can expect the alpha particle activity in your water to be significantly reduced. This means the radioactive constituents measured in raw groundwater will be filtered out before reaching your tap, resulting in water that aligns more closely with the area’s lower detection ranges. While this does not alter the water’s taste or odor, it does address the presence of uranium and radium particles, providing peace of mind to households concerned about these elements.
What Is the Essential Step to Confirming Whether This Treatment Is Needed for Your Home?
The definitive action is to order a laboratory test specifically measuring alpha particle radioactivity in your own household water supply. Only this targeted test can determine the actual uranium and radium content present in your well or private water source. If the result shows alpha particle activity near or above median regional values, using a treatment system like the Fleck Uranium & Radium System can be an effective way to reduce those levels. This test result will guide your decision confidently, ensuring you choose the appropriate equipment for your home's water quality.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2015-08-05. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Alpha particle in the 341LRBW aquifer (Pike County): 122 results from 16 wells, median 1.3 pCi/L, range -0.7-13.9 pCi/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.