Autotrol Uranium & Radium System

Buy Now

View full details

Stepwise Approach: From Basic Checks to Certified Laboratory Testing

If your existing water treatment equipment has failed and you suspect Uranium-Radium contamination, the first step is to assess what basic checks you can perform before committing to laboratory analysis. Begin by reviewing historical data for Kent County, specifically its aquifer 112CLMB, which has been sampled by the U.S. Geological Survey. This data, comprising 12 alpha particle results from 6 wells sampled between August 2012 and August 2013, shows detection in all samples at levels from -3.2 to 1.7 pCi/L, with a median of 0.6 pCi/L, all below federal action thresholds.

Since these measurements are area-level and not from your own well, they cannot substitute for a certified test on your specific water source. After confirming general regional background levels are not elevated beyond federal guidance, the next recommended step is to obtain a certified laboratory uranium and radium test for your water to understand its precise content.

Public-System Records Versus Private-Well Testing: What Each Confirms

Public water system records in Kent County provide broad evidence about the aquifer’s typical Uranium-Radium levels but do not reflect individual household wells. These records indicate no federal limits were exceeded in sampled wells ranging from 9 to 54 feet deep. However, private wells may tap different depths or localized geological formations. Therefore, private well testing is essential for households to establish their own water quality, especially when past equipment has failed and reliability is critical.

Changing Water Quality at the Tap: Effects of the Autotrol Uranium & Radium System

Once you acquire the Autotrol Uranium & Radium System—which ships ready to configure—its advanced technology reduces uranium and radium concentrations from your water, enhancing overall quality. By removing these alpha particle emitters, the system helps maintain clearer, cleaner water for household use. This system has a grain capacity of 32,000 grains, supporting ongoing treatment needs in typical residential settings. After system integration, treated water at the tap should show significantly diminished alpha particle activity, contingent upon proper system operation and water testing.

Comparing Kent County with Surrounding Areas Without Overreading Data

When comparing Uranium-Radium data from Kent County’s 112CLMB aquifer with neighboring counties, it is important not to overinterpret differences. Variations in sample results often reflect different depths, well locations, or sampling times rather than fundamental water quality issues. Kent County’s stable alpha particle median and absence of federal-level exceedances suggest a modest regional presence consistent with geological norms in this area. Neighboring counties may show slightly different ranges, yet none signal immediate concern unless confirmed by individual well testing.

Impact of Sample Depth, Well Depth, and Source Type on What to Expect

Sample and well depth influence Uranium-Radium concentrations. The USGS samples in Kent County came from wells between 9 and 54 feet deep, so deeper wells might yield different results. Additionally, water from confined aquifers versus shallow groundwater sources can vary in these constituents. Households drawing from wells outside these typical depths or different geologic zones should emphasize private testing to clarify their specific condition. Source type—such as drilled wells versus springs—also affects expected alpha particle levels.

In summary, the U.S. Geological Survey’s sampling for Kent County aquifer 112CLMB provides a reliable regional overview of Uranium-Radium presence. Twelve results from six wells show detected alpha particle measurements below all federal action levels. For your household, obtaining a certified laboratory test remains the definitive step to determine your water’s Uranium-Radium concentration after equipment failure. The Autotrol Uranium & Radium System is documented to reduce these constituents effectively and ships ready to configure for residential needs. For detailed data, visit the U.S. Geological Survey monitoring site at waterdata.usgs.gov/monitoring-location/391233075433102/

Where this information comes from

Source: USGS groundwater sampling. Sampled 2013-08-28. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Alpha particle in the 112CLMB aquifer (Kent County): 12 results from 6 wells, median 0.6 pCi/L, range -3.2-1.7 pCi/L; none above any federal threshold