This week, you must decide how to address uranium and radium concerns in your household water after your current treatment system has stopped working.
Samples and Wells Behind Garland County Uranium Data
The uranium data informing this region's water quality comes from nine samples collected between August 2017 and July 2023 across six wells in Garland County, within aquifer 364BGFK. These wells range in depth from roughly 50 to 228 feet. Not all wells detected uranium; only three of the nine results showed measurable amounts, with the remaining six below reporting limits. It is important to note that these figures represent area-level conditions, not the uranium concentration in your specific well. Testing your household water directly is necessary for an accurate personal assessment.
First Fixtures and Appliances Affected by Uranium and Radium
Uranium and radium in water primarily pose concerns when they pass through fixtures used for drinking and cooking, such as kitchen faucets and drinking water dispensers. Appliances that use water for consumption or food preparation can be affected by these constituents. Areas such as showers or laundry typically see less direct impact related to uranium and radium levels but may still reflect overall water quality changes. Understanding which points of use come first in contact with untreated water helps in prioritizing treatment needs following equipment failure.
Changes for Different Household Types
Large households or properties used as second homes and seasonal residences may experience different impacts from uranium and radium in their water.
- Large Households: Higher water demand may require more robust treatment capacity to maintain consistent water quality at all points of use.
- Second or Seasonal Homes: Intermittent use can complicate water quality management, making treatment readiness important when the property is occupied.
Considering these factors helps in selecting a treatment solution that aligns with household size and usage patterns after treatment system failure.
Measured Uranium in Garland County Compared to Federal Standards
The median uranium concentration from the sampled wells is 0.205 micrograms per liter, with a range from 0.049 to 0.207 micrograms per liter. No measurements exceeded federal standards for uranium in drinking water. This means the sampled area wells meet all applicable federal limits. However, these findings do not indicate the uranium level in any individual well, nor do they guarantee your household water is free from uranium or radium. Direct testing remains essential to determine your home's water quality status.
How the C-Series Uranium & Radium System Addresses These Concerns
The C-Series Uranium & Radium System ships ready to configure for residential water treatment. It has a grain capacity of 32,000, designed to reduce uranium and radium concentrations effectively when operating within its capacity range. This technology helps neutralize these constituents, improving water quality at critical points of use such as drinking faucets. Using this system restores the treatment function lost by the failure of existing equipment.
Deciding how to manage uranium and radium after equipment failure involves understanding the limited but informative area sampling data, which does not substitute for your own water test. Additionally, evaluating household water use patterns and treatment technology options like the C-Series System supports a clear path forward in maintaining safe and clean drinking water.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2023-07-24. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Uranium in the 364BGFK aquifer (Garland County): 9 results from 6 wells, median 0.205 ug/L, range 0.049-0.207 ug/L; none above any federal threshold