Fleck Total Well Chlorination System

Buy Now

View full details

What is known about the water quality in Washington County's aquifer 112SRFD and how does it flow to homes?

The water supplying many homes in Washington County comes from aquifer 112SRFD, a groundwater source accessed by wells typically between 72 and 95 feet deep. Water naturally moves through soil and rock layers, drawing minerals and compounds into the well. Government sampling in this aquifer, conducted by the U.S. Geological Survey between 2011 and 2019, focused on chloride—a common dissolved substance. Four samples from two wells showed chloride concentrations ranging from 23.7 to 91.1 milligrams per liter, with a median of 38.85 mg/L. All results were below any federal thresholds, indicating no recorded exceedances of health-based limits for these measurements in this area.

What household symptoms might suggest a need for total well water treatment, and what symptoms do not?

Households experiencing cloudy water, unusual taste, or staining on fixtures might consider total well water treatment as one way to address these concerns. However, these symptoms alone don’t confirm the presence of total dissolved substances at problematic levels. Conversely, clear water without signs of mineral buildup or corrosion generally suggests less urgency for treatment targeted at total constituents. Symptoms like these can have many causes, so they should prompt further evaluation rather than a direct assumption of total constituent problems.

How can homeowners rule out potential issues before choosing a treatment approach?

Begin with simple checks such as observing water clarity and taste. Next, household testing kits can provide preliminary indications of water quality, but for reliable results, laboratory testing is essential. A laboratory test of your specific well water can measure total dissolved solids and related factors to determine whether treatment is needed. This step is critical because local aquifer data reflect area conditions and do not reveal individual well water characteristics. Testing helps avoid unnecessary or ineffective treatment choices.

How should a homeowner interpret the median and range of chloride levels reported for this aquifer?

The reported median chloride concentration of 38.85 mg/L indicates the midpoint of the sampled values, with some wells showing as low as 23.7 mg/L and others as high as 91.1 mg/L. This range reflects natural variability in the aquifer rather than safety or quality judgments. Since all samples were below federal thresholds, the data establish that chloride levels in this area are generally consistent with typical groundwater. However, individual well water might differ, so personal testing remains essential.

How can a household assess if a treatment system's capacity matches their daily water use?

Water treatment systems must be sized appropriately to handle a household’s daily water demand. For example, a system with a grain capacity of 32,000 can handle substantial total constituents before requiring rejuvenation. Estimating your household’s daily water use in gallons and matching system specifications accordingly ensures effective and efficient treatment. This step helps prevent overloading the system or underutilizing its capacity.

How do public water system records differ from private well testing for households?

Public water system records provide data on water delivered to many users and are based on regular sampling from the source or distribution. These records indicate area-wide water quality trends but do not provide details about individual well conditions. Private well testing, in contrast, offers direct measurement of the water at a household’s point of use and captures unique local conditions. Therefore, relying solely on public records could miss well-specific issues requiring treatment.

What documented treatment solution is appropriate for Washington County households concerned about total constituents?

For households facing total well water concerns, especially after measuring daily water demand and confirming constituent levels, a Fleck Total Well Chlorination System is a practical option. This system ships ready to configure and supports treating up to 32,000 grains of total dissolved substances, aligning well with typical household needs. By using such technology, homeowners can effectively manage total water constituents based on their own water analysis and usage patterns.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2019-09-17. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Chloride in the 112SRFD aquifer (Washington County): 4 results from 2 wells, median 38.85 mg/L, range 23.7-91.1 mg/L; none above any federal threshold