Sample Size and Scope Behind Muskegon County’s Water Data
Number of Wells Sampled
Five wells contributed to the chloride results in this area, each sampled between July and November 2015.
Depth of Sampled Wells
These wells were shallow, ranging from 5 to 6 feet deep, which is relevant for understanding the context of the measurements.
Number of Samples Taken
Sixty results represent the combined data set from these wells, providing an overview of chloride presence in the aquifer.
Interpretation of a Small Sample Size
While 60 samples from 5 wells offer useful regional insight, they do not represent every individual well’s water content or quality within Muskegon County.
Understanding Chloride Levels in Relation to Federal Standards
Measured Chloride Range
The chloride concentration in sampled wells ranged from 38.8 to 135.0 mg/L, with a median of 111.0 mg/L.
No Federal Thresholds Exceeded
Importantly, no samples in this data set exceeded any federal chloride standards, meaning they were within regulatory limits designed to address aesthetic factors such as taste and corrosion potential.
What These Levels Do Not Indicate
The presence of chloride at detected levels does not imply a health violation or unsafe water. Rather, it indicates measurable chloride levels that might influence water characteristics.
Sources of Chloride in Muskegon County Groundwater
Likely Origins of Chloride
Chloride in this region commonly enters groundwater from natural mineral deposits and human-related activities such as road salt application.
Influence of Local Practices and Geology
The shallow wells sampled reflect surface and near-surface influences, making local conditions a factor in chloride variability.
Comparing Muskegon County’s Chloride Data with Neighboring Areas
Avoiding Overinterpretation
While comparing Muskegon County results with nearby counties can help contextualize regional water quality, differences in geology and local land use mean such comparisons should be cautious and not assume direct equivalence.
Value of Regional Data
These comparisons emphasize that chloride presence varies naturally and by human influence, underscoring the need for individual water tests to confirm specific well conditions.
Changes After Using a Total Well Chlorination System
Treated Water Characteristics
Once the C-Series Total Well Chlorination System is in use, it helps reduce microbial concerns by disinfecting well water, improving safety and water quality at the household tap.
System Capacity
The system can handle treatment demands corresponding to a grain capacity of 32,000, suitable for typical residential water use.
Preparing for Treatment Advice
Record Your Water Test Results
Collect and document your well water test data, especially microbial and mineral levels, to guide effective treatment choices.
Note Well Characteristics
Include well depth, location, and construction details to provide context for treatment discussions.
Understand Regional Context
Use available Muskegon County data to frame your water quality but rely on your own water test for accurate treatment decisions.
The chloride data summarized here comes from U.S. Geological Survey groundwater sampling of five wells in Muskegon County’s aquifer 111ALVM, collected in 2015. For full details, visit the USGS water data website.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2015-11-23. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Chloride in the 111ALVM aquifer (Muskegon County): 60 results from 5 wells, median 111.0 mg/L, range 38.8-135.0 mg/L; none above any federal threshold