Middlesex County homes drawing from the 112SRFD aquifer rely on groundwater that travels from subsurface layers—typically between 19 and 93 feet deep—to the well. This water carries dissolved minerals and constituents commonly measured by government agencies like the U.S. Geological Survey to help characterize regional water quality conditions. Understanding these conditions can help a household select and size a total well water treatment system appropriately for their daily use.
How Do Sample and Well Depth Affect What I Should Expect in My Water?
Samples collected in Middlesex County from wells within this aquifer were taken at various depths ranging from 19 to 93 feet. Because water chemistry can change with depth and geological formations, these depth differences mean constituents detected in sampled wells may vary. A well drawing from a shallower or deeper layer than these samples might see different water characteristics. Therefore, the data from these samples describe the broader aquifer conditions but cannot specify what is in an individual well without testing that well directly.
How Can I Compare Treatment System Capacity to My Daily Household Water Use?
For sizing a total well water treatment system, it is crucial to know your household's daily water consumption. The documented system addressed here has a grain capacity of 32,000, a measure related to how much dissolved material it can handle before regeneration or refresh is needed. Matching this capacity to the volume and quality of water your household uses daily ensures consistent treatment performance. Estimating daily water use involves considering the number of occupants and typical activities that consume water, such as bathing, cooking, and cleaning.
What Does the Range of Chloride Measurements Tell Me About My Water Quality?
The U.S. Geological Survey reported chloride concentrations in this aquifer ranging from 28.0 to 380.0 milligrams per liter, with a median of 163.0 milligrams per liter based on 23 samples from 11 wells. Chloride is an indicator that can affect the taste and corrosivity of water but is governed by secondary standards set at 250.0 milligrams per liter for aesthetic concerns such as taste and staining. Two of the samples exceeded this secondary standard, but this does not imply a health risk or violation. Instead, it signals that some wells in the area may produce water with qualities noticeable in taste or appearance. To understand your specific water's chloride level, a well water test is necessary since these regional figures cannot substitute for direct measurement.
Are There Additional Considerations for Commercial or Industrial Water Users?
Commercial and industrial users often face higher water demand and need to consider additional factors beyond residential sizing. These can include fluctuations in water quality related to process needs, potential impacts on equipment performance, and compliance with regulatory standards that may be stricter than those for household use. Assessing the total volume of water required and the characteristics of the water source on a continuous basis is essential for adequate system capacity and reliability in such settings.
What Happens If Total Well Water Treatment Is Not Addressed Over Time?
Over years without appropriate water treatment, constituents in well water can cause gradual but noticeable impacts such as buildup of deposits in pipes and appliances, changes in taste, and possible corrosion of plumbing systems. These effects may reduce the lifespan of household fixtures and increase maintenance needs. Addressing water treatment needs with a system designed to handle your household’s usage ensures better protection for plumbing and appliances, as well as maintaining water aesthetics.
For households in Middlesex County using well water from aquifer 112SRFD, selecting a total well water treatment system with appropriate capacity is key. The Fleck Total Well Chlorination System, with its documented 32,000 grain capacity, ships ready to configure and is engineered to address typical demands in this region with effective treatment performance based on your own water use assessment.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2019-09-26. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Chloride in the 112SRFD aquifer (Middlesex County): 23 results from 11 wells, median 163.0 mg/L, range 28.0-380.0 mg/L; 2 above an AESTHETIC secondary standard only (secondary standard 250.0 mg/L (aesthetic)) - not a health finding
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.