Is water sample depth relevant to choosing treatment for a household well?
In CT's FIPS 180 area, groundwater samples come from wells ranging 10 to 80 feet deep within aquifer 112DFSF. This depth range influences water characteristics. Shallower or deeper household wells may encounter different water chemistry. Understanding sample depth helps set expectations for what your well water might contain, but it does not substitute for your own water test. Knowing this, you can better assess treatment options suited to typical levels found at these depths.
What key information should I have before considering treatment advice?
Before deciding on treatment, note your well's depth and any water test results. Regional sample data show iron detected in 21 of 70 results with a median of 19.5 micrograms per liter, but individual wells can vary widely, from low to 700 micrograms per liter. No federal threshold was exceeded in these samples, indicating no regulatory health concern regionally. You should obtain specific water quality data for your own well to tailor treatment appropriately.
How does water quality in this area vary over time?
The regional samples span over a decade, from 2015 to 2025, showing a broad range of iron detections across multiple wells. This indicates that water quality can fluctuate over seasons and years. Such variations emphasize the importance of periodic testing of your own well water to identify current conditions and ensure that treatment capacity matches these changes over time.
Are there additional considerations for commercial or industrial water users here?
While this page focuses on residential wells, commercial or industrial users might need to consider higher usage volumes and consistency of water quality over time. They would also require treatment solutions with larger capacity or specific certifications. Residential households primarily focus on consistent, reliable treatment tuned to household water consumption and typical groundwater conditions as outlined by regional data.
How does the Pentair Total Well Chlorination System address treated water quality?
The Pentair Total Well Chlorination System ships ready to configure for your home’s well water. It targets constituents like iron by neutralizing and removing them effectively. With a grain capacity of 32,000, it supports household water demands based on the range indicated by regional sample data. Using this technology helps reduce secondary effects related to detected iron concentrations, improving water clarity and taste.
In summary, groundwater sampling in CT's FIPS 180 and aquifer 112DFSF provides useful context about typical water quality at various depths but does not determine your well's exact condition. The record reflects results from 19 wells sampled between 2015 and 2025. For specific treatment needs, test your own water and consider systems like the Pentair Total Well Chlorination System designed to handle the documented range of constituents. More detailed data is available from the U.S. Geological Survey at https://waterdata.usgs.gov/monitoring-location/413644072080501/.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2025-11-21. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Iron in the 112DFSF aquifer (FIPS 180): 70 results from 19 wells, median 19.5 ug/L, range 0.04-700.0 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.