Routine Care for C-Series Sensitive Skin & Eczema System
Replace media based on grain capacity
The C-Series System handles up to 32,000 grains before media renewal is needed, aligning with typical household water use when addressing sensitive skin concerns.
Frequency depends on household water use
Maintenance rhythm varies by water consumption, which differs among residences. Monitoring water volume helps schedule media refresh intervals.
System ships ready to configure
The equipment arrives prepared for household setup without requiring professional assistance, simplifying ongoing care for sensitive skin water treatment.
Understanding Laboratory Hardness Test Results
Results report calcium and magnesium concentrations
Certified laboratory tests measure these elements to calculate water hardness, an important factor affecting skin sensitivity.
Median hardness in Pottawatomie County is 62.0 mg/L
This value, derived from 24 sampled wells, represents a typical hardness measure in the area aquifer 310WLNG but does not specify individual household water properties.
Range indicates variability across wells
Hardness values in the area span from 12.2 to 364.0 mg/L, reflecting natural differences without implying any household water is outside regulatory health thresholds.
Sources of Hardness in Pottawatomie County Groundwater
Calcium and magnesium naturally dissolve from local geology
These minerals enter the aquifer as water interacts with soil and rock beneath the region, influencing water composition.
Sampling focused on wells 80 to 320 feet deep
Depth variations affect mineral levels, with the collected data representing a range of typical residential well depths in the area.
No sample exceeded federal hardness-related safety thresholds
Government testing confirms that all measurements remain within accepted health standards, indicating no safety violations regarding hardness.
Long-Term Effects of Untreated Hard Water on Sensitive Skin
Potential for dryness and irritation with prolonged exposure
Hard water may contribute to skin discomfort in sensitive individuals by leaving mineral residues that affect moisture retention.
Accumulation of minerals can impact soap effectiveness
Reduced soap lathering may require more effort to rinse, possibly exacerbating skin sensitivity issues over time.
Addressing hardness can alleviate skin discomfort
Implementing appropriate water treatment can improve skin feel and reduce irritation related to mineral content.
Information to Gather Before Seeking Treatment Advice
Obtain a certified laboratory test of your household water
This test confirms precise hardness levels specific to your water supply, essential for personalized treatment decisions.
Note well depth and water source type
These details help interpret test results and align treatment options with your water characteristics.
Observe household water usage patterns
Understanding volume and flow aids in selecting and maintaining an effective treatment approach.
The data summarized here come from 24 wells sampled in Pottawatomie County’s aquifer 310WLNG between 2011 and 2013, with results publicly available from the U.S. Geological Survey groundwater database.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2013-05-01. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 310WLNG aquifer (Pottawatomie County): 24 results from 24 wells, median 62.0 mg/L, range 12.2-364.0 mg/L; none above any federal threshold